International Gas Turbine Congress 1999 Kobe
International Conference Center Kobe, Nov. 14-19, 1999
-----------------------------------------------------------------------------------------------------
Room A (International Conference Room)
November 15 (Mon)
Chairperson: Dr. Y. Nakamura (Ishikawajima-Harima Heavy Industries, Co. Ltd.)
Keynote Speech 1 (9:35-10:35)
Industrial Gas Turbines in a Globally Competitive Market and Environmental Regulations
Mr. I. Fukue (Mitsubishi Heavy Industries, Ltd. )
Keynote Speech 2 (10:50-11:50)
Gas Turbine Hot Parts Maintenance and Repair Technology
Mr. T. Honma (Toshiba Corporation)
November 16 (Tue)
Chairperson: Dr. T. Tamaru (National Aerospace Laboratory)
Keynote Speech 3 (9:00-10:00)
Gas Turbine Combustion and Emission Abatement Technology-Current and Projected Status
Mr. D. W. Bahr (Consultant, former G. E. researcher, USA)
November 17 (Wed)
Chairperson: Dr. S. Aoki (Mitsubishi Heavy Industries, Ltd.)
Keynote Speech 4 (9:00-10:00)
State of the Art and Future of Turbine Technology
Prof. John D. Denton (Cambridge University, UK)
Keynote Speech 5 (10:30-11:30)
Gas Turbine Compressor Technology: Status and Opportunities
Prof. E. M. Greitzer (Massachusetts Institute of Technology, USA) and Dr. David C. Wisler (GE Aircraft Engines, USA)
November 18 (Thu)
Chairperson: Dr. M. Sasaki (National Aerospace Laboratory)
Keynote Speech 6 (9:00-10:00)
Commercial Aircraft Gas Turbines in 21st Century
Mr. M. Ito (Ishikawajima-Harima Heavy Industries, Co., Ltd.)
-----------------------------------------------------------------------------------------------------
Organized Session 1 Ceramic Gas Turbines
November 15 (Mon) 13:00-15:15 Room A
Chairpersons: Prof. H. Yoshiki (Univ. of Tokyo), H. Yamamoto (Kawasaki Naval Engine Service, Ltd.)
Development Summary of CGT302 Ceramic Gas Turbine
I. Takehara* (Kawasaki Heavy Industries, Ltd.), T. Tatsumi, Y. Ichikawa
Ceramic Stationary Gas Turbine Development -Opportunities and Challenges-
M. van Roode* (Solar Turbines Incorporated, USA), J.R. Price, S. Gates, S. Waslo, P. Hoffman
The European Ceramic Gas Turbine Program -AGATA
R. Gabrielsson* (Volvo Aero Corporation, Sweden), P. Avran
Development of Fabrication Process for Ceramic Gas Turbine Components
H. Terazono* (Kyocera Corporation), K. Tanaka, T. Kubo, S. Tsuruzono, M. Yoshida
Nondestructive Testing for Ceramic Gas Turbine Project
Y. Ikeda* (Japan Fine Ceramics Center), Y. Mizuta, K. Onda
-----------------------------------------------------------------------------------------------------
Organized Session 2 Marine and Industrial Gas Turbines
November 15 (Mon) 13:00-15:15 Room B
Chairpersons: Prof. S. Hayama (Toyama Prefectural Univ.), Dr. H. Ishii (Hitachi, Ltd.)
R&D Plan for the Next-Generation Marine Gas Turbine (Super Marine Gas Turbine)
T. Sugimoto* (Kawasaki Heavy Industries, Ltd.), H. Miyaji, T. Shikina, T. Kato, K. Nakanishi, M. Murota, M. Tanaka, M. Kawamoto
The Low Caloric Gas Firing l50 MW Combined Cycle Power Plant
K. Nakasu* (Japan Gas Turbine, K. K.), T. Kimura, Y. Fujisaki, H. Yamada, H. Shimizu, J. Zhu, G. Gan
Qualification of the WR-21 Gas Turbine System of Service
M.L. Parker* (Rolls-Royce plc, UK), D.A. Branch
Vertical Gas Turbine VEST Series for Pump Drivers
K. Iguchi* (Ebara Corporation), K. Eto
Development of L-Shaped Gas Turbine LGT-O1 for Larger Pump Stations
T. Iwamoto (Kawasaki Heavy Industries, Ltd.), T. Nakagawa*, T. Kotake, T. Kawashima
-----------------------------------------------------------------------------------------------------
Organized Session 3 Advanced Combined Cycle
November 15 (Mon) 15:35-17:25 Room A
Chairpersons: Dr. J. Hoffmann (ABB Alstom Power, Switzerland), Dr. S. Aoki (Mitsubishi Heavy Industries, Ltd.)
Construction of Higashi-Niigata Thermal Power Station, Unit No. 4
S. Takahashi* (Tohoku Electric Power Co., Inc.), N. Abe, N. Yamada, H. Matsuzaki
Current Operating Status of Mitsubishi "GM" series Gas Turbines
K. Tsukagoshi (Mitsubishi Heavy Industries, Ltd), Y. Tsukuda, E. Akita, Y. Iwasaki*, M. Nishida
Performance Analysis of Combined Cycle Power Plant with Packed Column CO2 Separator Using Aqueous Monoethanolamine Solution
M. Ikame* (Ship Research Institute), S. Kan, K. Hiraoka, T, Kumakura
Phu My 2.1 Extension-A Successful Experience for the First Application of a Model V94.2 Gas Turbine in Viet Nam
V. Rosen* (Siemens AG, Germany), O, Northam
-----------------------------------------------------------------------------------------------------
Organized Session 4 Advanced Materials and Coatings
November 15 (Mon) 15:35-17:25 Room B
Chairpersons: Dr. R. Gabrielsson (VoIvo Aero Corporation, Sweden), Dr. Y. Sakon (Mitsubishi Heavy Industries, Ltd.)
Investment Casting Titanium Aluminide Components for Advanced Applications
H. Ishikawa* (Research Institute of Advanced Material Gas-Generator), T. Yoshimi, T. Hosokawa
Effect of Residual Strain and Recrystallization Temperature on Recrystallization Behavior of ODS Alloy
T. Hamada* (Toshiba Corporation), Y. Ishiwata, Y. Yoshioka, K. Nagata
Design of Single Crystal Superalloys for Industrial Gas Turbines
T. Hino* (Toshiba Corporation), Y, Ishiwata, Y. Yoshioka, K. Nagata, T. Kobayashi, Y. Koizumi, H. Harada, T. Yamagata
Development of Advanced Nickel Based Superalloy MGA1400 for Industrial Gas Turbine
D. Izutsu* (Mitsubishi Heavy Industries, Ltd), I. Okada, H. Kawai, K. Takahashi, A. Mitsuhashi
-----------------------------------------------------------------------------------------------------
Organized Session 5 HYPR -HST/SST Propulsion System
November 17 (Wed) 14:45-17:50 Room A
Chairpersons: Mr. K. Ishizawa (Engineering Research Association for Supersonic Propulsion System), Dr. Y. Nakamura (Ishikawajima-Harima Heavy Industries Co., Ltd.)
Research and Development of Low Pressure Components
K. Kishi (Mitsubishi Heavy Industries, Ltd.), K. Shimizu, R. Nogami, M. Hirota, A. Tobita*
Research on a Low NOx Combustor for a Mach 3 Supersonic Transporter Turbojet Engine
Y. Kinoshita* (Kawasaki Heavy Industries, Ltd.), T. Oda, J. Kitajima
Research of Mach 5 Ramjet Propulsion System
T. Ohshima* (Kawasaki Heavy Industries, Ltd.), Y. Enomoto, Y. Kinoshita, H. Nakanishi, H. Futamura, R. Yanagi, T. Mitani
Research and Development of High Temperature Core Engine
T. Fujimura* (Ishikawajima-Harima Heavy Industries Co., Ltd.), S. Tsugumi, H. Kimura, K. Shimizu, J. L. Cabe, R. Yanagi
Overall Review of Engineering Research for Super/Hypersonic Transport Propulsion System (HYPR)
K. Ishizawa' (Engineering Research Association for Super/Hypersonic Transport Propulsion System)
Research and Development of Mixer-Ejector Nozzle for Noise Reduction
Y. Nakamura (Ishikawajima-Harima Heavy Industries Co., Ltd.), T. Oishi*
R&D and Simulated Altitude Testing of HYPER Combined Cycle Engine
T. Mitsuoka* (Ishikawajima-Harima Heavy Industries Co., Ltd.), Y. Nakata, H. Miyagi, H. Kimura, K. Kishi, G. Wells, J,L, Cabe, R. Yanagi
-----------------------------------------------------------------------------------------------------
Organized Session 6 Unsteady Aerodynamic Force/Vibration
November 17 (Wed) l4:45-17:25 Room B
Chairpersons: Prof. M. Namba (Kumamoto Institute of Technology) Prof. X. Sun. (Beijing University of Aeronautics and Astronautics, P.R.China)
Investigation On Aerodynamic Damping Force Including Panel Vibration Mode
K. Kobayashi* (Ishikawajima-Harima Heavy Industries Co., Ltd.)
Aerodynamic Excitation and Vibration in Radial Inflow Turbines
T. Kreuz-Ihli*(University of Karlsruhe, Germany). A. Schulz, S. Wittig
Forced Response and Stability Analysis of a Mistuned Bladed Disk
Y. Kaneko (Mitsubishi Heavy Industries, Ltd.), K, Mori*
Experimental Study on Unsteady Aerodynamic Characteristics of Transonic Compressor Cascades (Pressure Transfer Characteristics of Indirect Unsteady Pressure Measurements)
T. Hirano* (Takushoku University), I. Fujimoto, H. Tanaka
Rotordynamic Fluid Force Moments on an Open-Type Centrifugal Compressor Impeller in Processing Motion
Y. Yoshida* (Osaka University), Tsujimoto, D. Yokoyama, H. Ohashi, F. Kano
Stability Analysis of a Turbine Rotor System with Al ford Forces
H.S. Kim (Inha University, Korea), M. H. Cho, S.J. Song*
-----------------------------------------------------------------------------------------------------
Gas Turbine Contribution to Environmental Concerns
November l8 (Thu) 14:30-17:20 Room A
Chairpersons: Mr. D. W. Bahr (Consultant, former GE researcher, USA), Prof. M. Katsuki (Osaka Univ.)
Panelists:
Prof. M. Hirata (Shibaura Institute of Technology)
Dr, S. Mandai (Mitsubishi Heavy Industries, Ltd.)
Mr. S. Miura (Tokyo Gas, Co., Ltd.)
-----------------------------------------------------------------------------------------------------
Session A-1 Development 1
November 16 (Tue) 10:20-11:35 Room A
Chairpersons: Prof. S. T. Ro (Seoul National University, Korea) Dr. T. Yoshida (National Aerospace Laboratory)
Engine Rotor Dynamics on Hypersonic Transport Propulsion System Research
M. Shinozaki* (Ishikawajima-Harima Heavy Industries Co., Ltd.), T. Fujimura, O. Funatogawa, S. Tsugumi, M. Kobayashi
Study of a Ceramic/Metal-Shaft/Hub Joining Technique for Applications in Small Ceramic High Temperature Gas Turbines
U. Heinrich* (Technical University Berlin, Germany), K. Majidi, H. Pucher, B. Schenk
Fabrication of SiC Whisker Reinforced Si3N4 Ceramics Turbine Nozzles by Slip Casting
H. Ishizuka* (Research Institute of Advanced Material Gas-Generator), Y. Saida
-----------------------------------------------------------------------------------------------------
November 16 (Tue) 13:10-14:50 Room A
Chairpersons: Dr. D. M. Todd (General Electric Co., USA), Dr. T-Ikeguchi (Hitachi, Ltd.)
Steam Injected Gas Turbine Progress in the People's Republic of China
X. Went (Harbin Marine Boiler & Turbine Research Institute, P.R. China)
Kawatetsu Chiba Clean Power Station-KA26-1 Single Shaft plant for Competitive and Reliable IPP Power Generation
K. Yoshida (Kawasaki Steel Corporation), J. Shobayashi, I. Matsuno, W. Jury*
Design Study of Helium Turbine for the 600MWt HTGR-GT Power Plant
Y. Muto* (JAERI), S. Ishiyama, T. Tanuma, T. Kishibe, I. Matsumoto
IGCC Operational Experience with Advanced Gas Turbines
R. D. Brdar*(General Electric Co., USA), R. M. Jones
-----------------------------------------------------------------------------------------------------
November 16 (Tue) 15:10-17:15 Room A
Chairpersons: Dr. V. Rosen (Siemens AG, Germany), Prof. T. Araki (Musashi Institute of Technology)
The Primary Surface Recuperator Durability and Applications
M. E. Ward* (Solar Turbines Incorporate, USA), M.D. Stephenson
Development of High Speed Generator for the Ceramic Gas Turbine
H. Ogita* (Mitsubishi Motors Corporation), S. Inaba, T. Yoshizawa
Test Results of Closed-Circuit Cooled Blades for 1700°C Hydrogen-Fueled Combustion Gas Turbines
N. Kizuka* (Hitachi, Ltd.), K. Sagae, S. Anzai, T. Ikeguchi, K. Kawaike
Research and Development of 1700°C Hydrogen Combustion Turbine in WENET Program
K. Mouri* (Japan Power Engineering and Inspection Corporation)
GT8C-GT8C2 Compressor Development, Enhanced Engine Performance, and Customer Value
J. Hoffmann* (ABB Alstom Power, Switzerland), T. Meindl, D. Novak, P. Baerfuss
-----------------------------------------------------------------------------------------------------
November 17 (Wed) 12:45-14:25 Room A
Chairpersons: Dr. Q.H. Nagpurwala (National Aerospace Laboratories, India), Prof. K. Ito (Osaka Prefecture Univ.)
Non-Adiabatic Energy Process in Exhaust-Gas Turbines Using Heuristic Simulation Method
D. Hagelstein* (University of Hannover, Germany), H. Hasemann, R. Baar, M. Rautenberg
Comparison of Flow Field and Performance of Internal and External Volutes for Centrifugal Compressors
D. Hagelstein* (University of Hannover, Germany), H. Hasemann, R, Keiper, M. Rautenberg
Evaluation of Economic Robustness of Gas Turbine Cogeneration plants with Variable Heat to Power Ratios
R. Yokoyama* (Osaka Prefecture University, K. Ito, K. Sato
Gas Turbine Engine Model with Neural Network for Operating Behaviour Simulation
H. Abdullahi* (MTU Motoren-und Turbinen-Union MEchen GmbH, Germany)
-----------------------------------------------------------------------------------------------------
November 18 (Thu) 10:20-12:00 Room A
Chairpersons: Dr. H. Hasemann (Univ. of Hannover, Germany) Mr. K. Hiraoka (Ship Research Institute)
Hydrogen Decomposed Turbine (HYDET) for Carbon Dioxide Recovery
H. Moritsuka* (Central Research Institute of Electric Power Industry)
Hydrogen-Oxygen Fired Integrated Turbine Systems -Comparison on MORITS and GRAZ-
H. Moritsuka* (Central Research Institute of Electric Power Industry), E. Koda
Conceptual Study on MGT (Mirror Gas Turbine) Cycle
Y. Tsujikawa* (Osaka Prefecture University), K. Otani, K. Kaneko, T. Watanabe, S. Fujii
Study on High Performance CAES Power Generation System Applying the Advanced Combined Cycle Technology
E. Koda* (Central Research Institute of Electric Power Industry)
-----------------------------------------------------------------------------------------------------
November 18 (Thu) 13:00-14:15 Room A
Chairpersons: Dr. H. Abdullahi (MTU Motoren-und Turbinen-Union MEchen GmbH, Germany), Dr. K. Kawaike (Hitachi, Ltd.)
Prediction of the Transient Behavior of a Regenerative Gas Turbine
J.H. Kim* (Seoul National University, Korea), T.S. Kim, S.T. Ro
The Increase of Gas Turbine Engine Efficiency by Optimization of Cooling System
A. Slitenko* (Kharkov State Polytechnic University, Ukraine)
Optimized Cooling of the Compressor Intake Air-A New Way for the Improvement of Power and Efficiency in Gas Turbine Plants
D. Bies* (SaarEnergie, Germany), U. Johäanntgen, J. Scharfe
-----------------------------------------------------------------------------------------------------
November 16 (Tue) 10:20-11:35 Room B
Chairpersons: Prof. I. Teipel (Univ. of Hannover, Germany), Prof. M. Inoue (Kyushu Univ.)
Aerodynamic Design of Axial Compressor Blading Using Quasi-3D Inviscid Techniques Checked by 3D Navier-Stokes Solver
V.I. Mileshin* (Central Institute of Aviation Motors, Russia), I. K. Orekhov, A.N. Startsev
Investigation of Riblets in a CDB, DCA and 65-S Compressor Cascade
S. Nagao (Toshiba Corporation), F. A. E. Breugelmans*
Double Oblique Shock Airfoil in High Speed Axial-Flow Compressors
R. Nohara* (Research Institute of Advanced Material Gas-Generator), I. Mizuta, D. Kato, K. Kobayashi
-----------------------------------------------------------------------------------------------------
November 16 (Tue) 13:10-14:50 Room B
Chairpersons: Dr. M. A. Skopil (Sulzer Turbo Ltd., Switzerland), Dr. Y. Nakamura (Ishikawajima-Harima Heavy Industries Co., Ltd.)
Estimation of the Compressor Map for Incompletely Specified Axial Compressors
J. Kuhnel* (Swiss Federal Institute of Technology Zurich, Switzerland), G. Gyarmathy, P. Ortmann
Performance Estimation Method for Axial Turbine Stages
T. Ikeda* (Yokohama National University)
Optimization System for Compressor Aerodynamic Design
Y. Niizeki (Toshiba Corporation), T. Sasaki, Y. Horibata, Y. Fukuyama, T. Kobayashi
Optimization of Airfoil Design
K.D. Wang (University of Wisconsin -Milwaukee, USA), R.S. Amano*
-----------------------------------------------------------------------------------------------------
Session B-3 Advanced Numerical Analysis of Cascade
November 16 (Tue) 15:10-17:15 Room B
Chairpersons: Dr. C. Hah (NASA Glenn Research Center, USA), Prof. E. Outa (Waseda Univ.)
Numerical Study of Unsteady Gas and Steam Turbine Cascade Flows
S. Yamamoto* (Tohoku University), T. Tanuma
The Interrelated Structure between the Particle Motion and the Vortices in Gas-Particle Two-Phase Flows
Wu W.* (University of Shanghai for Science and Technology, P.R. China), Huang Y.
Application of an Improved k-e Turbulence Model to Predict the Compressible Viscous Flow Behavior in Turbomachinery Cascades
D. Biswas* (Toshiba Corporation), M. Ishizuka, H. Iwasaki
3D Navier-Stokes Simulation of a Transonic Flutter Cascade near Stall Conditions
B. Brouillet* (MTU MEchen GmbH, Germany). H. Benetschik, T. W. Volmar, H.E. Gallus, R, Niehuis
LES Analysis of 3D Flow around a Circular Cylinder
M. Nagata* (University of Tokyo). C. Arakawa
-----------------------------------------------------------------------------------------------------
November 17 (Wed) 12:45-14:00 Room B
Chairpersons: Prof. J. D. Denton (Cambridge Univ., UK), Prof. T. Watanabe (Univ. of Tokyo)
Numerical Investigation on Stall Flutter of a Compressor Cascade
T. Nishizawa* (National Aerospace Laboratory), H. Takata
Unsteady Phenomena Associated with the Shock Wave Occurring near the Stall Line in Two-Dimensional Supersonic Cascade
Y. Iwamoto* (Osaka University), K. I Yokota, Y. Tsujimoto
Comparative Study of the Methods for Detecting and Analyzing Rotating Stall Inception in Compressors
X. Cheng (Chinese Academy of Sciences, P.R. China), J. Chen*, C. Nie
-----------------------------------------------------------------------------------------------------
November 18 (Thu) 10:20-11:35 Room B
Chairpersons: Prof. R Niehuis (RWTH Aachen, Germany), Dr. T. Nishizawa (National Aerospace Laboratory)
Static Pressure Recovery of Compressible Flow in Radial Vaneless Diffusers
H.S. Dou (University of Sydney, Australia), S. Mizuki*
Observation of Centrifugal Compressor Stall and Surge in Phase Portraits of Pressure Time Traces at Impeller and Diffuser Wall
C. Gu* (University of Tokyo), K. Yamaguchi, T. Nagashima, H. Higashimori
Calculation of Compressor Surge with Unsteady Flow Model
M.A. Skopil* (Sulzer Turbo Ltd., Switzerland), T. Bulaty
-----------------------------------------------------------------------------------------------------
November18 (Thu) 13:00-14:15 Room B
Chairpersons: Prof. T. Nagashima (Univ. of Tokyo)
Unsteady Flow Induced by Circular Cascade
T. Ito* (Hitachi, Ltd.). N. Takama, K. Nishimura, H. Yoshiki
Unsteady Flow Phenomena in a Three Stage Axial Compressor with Controlled Diffusion Airfoils
A. Hoynacki* (RWTH Aachen, Germany), H.E. Gallus, R. Niehuis
Unsteady Tip Vortex Behavior and Its Effects on Aerodynamic Characteristics of Downstream Blades
T. Watanabe* (University of Tokyo), Y. Machida
-----------------------------------------------------------------------------------------------------
November 15 (Mon) 13:00-14:40 Room C
Chairpersons: Prof. A. E. Breugelmans (von Karman Institute, Belgium), Prof. S. Mochizuki (Tokyo Univ. of Agriculture and Technology)
Influences of Flow Unsteadiness on Conjugate Simulation of Thermofluid-Dynamics and Thermal Conductivity
T. Yamane* (National Aerospace Laboratory), T. Yoshida, F. Mimura, M. Taki.
Development of Hydrogen-Oxygen Combustion Turbine Cooling Blades in WE-NET Project
T. Okamura* (Toshiba Corporation), H. Kawagishi, A. Koga, S. Ito
Heat Transfer Measurements on a Turbine Nozzle Using Liquid Crystals
H. Saeki (Toshiba Corporation), S. Ito, H. Matsuda, H. Kawagishi, T. Okamura
An Experimental Study on the Film Cooling Effectiveness with Expanded Hole Geometry
K. Watanabe* (Mitsubishi Heavy Industries, Ltd,), M. Matsuura, K. Suenaga, K. Takeishi
-----------------------------------------------------------------------------------------------------
November 15 (Mon) 15:00-16:15 Room C
Chairpersons: Prof. R. S. Amano (Univ. of Wisconsin-Milwaukee, USA), Prof. K. Funazaki (Iwate Univ.)
Large Eddy Simulation of a Two-Dimensional Impinging Jet on Flat Plate
K. Suenaga (Mitsubishi Heavy Industries, Ltd.), T. Takata*, K. Takeishi, Y. Kawata
Heat Transfer Enhancements on Combustor Liner with Impingement/Effusion Cooling
H.H. Cho (Yonsei University, Korea), D.H. Rhee*
Impingement/Effusion Cooling: Influence of the Number of Holes on the Cooling Effectiveness for an Impingement X/D of 10.5 and Effusion X/D of 7.0
G.E. Andrews* (University of Leeds, UK), A. Nazari
-----------------------------------------------------------------------------------------------------
November 16 (Tue) 10:20-12:00 Room C
Chairpersons: Prof. A. Soudarev (EST, Russia), Dr. S. Mandai (Mitsubishi Heavy Industries, Ltd.)
Upstream Flow Characterization of the AGATA Catalytic Combustor by 2 D LDV Measurements
P. Avran (ONERA/DMTE, France), P. Gicquel*, A. Leclair, G. Payen
Discharge Flow of a Centrifugal Impeller in Unstable Operating Region Part1 : Measurement Techniques
Y.H. Shin* (Korea Institute of Science and Technology, Korea), K. H. Kim
Discharge Flow of a Centrifugal Impeller in Unstable Operating Region Part2: Flow Measurement
Y.H. Shin* (Korea Institute of Science and Technology, Korea), K.H. Kim
Optical Fiber Pressure Sensor for Measuring Air Pressure in Compressor
S. Hachiya* (Research Institute of Advanced Material Gas-Generator), K. Fujiwara, F. Kohsaka
-----------------------------------------------------------------------------------------------------
Session C-4 Combustor Elements
November 16 (Tue) 13:10-14:50 Room C
Chairpersons: Prof. G. E. Andrews (University of Leeds, UK), Dr. S. Hayashi (National Aerospace Laboratory)
Combustion Performance and Emission Characteristics of Ramjet Combustor in HYPR Project
K. Suzuki* (National Aerospace Laboratory), Y. Kurosawa, Y. Sakiyama, J. Guezet, M. Gomi
Test Bed Development of Design of Ceramic Combustor for Gas Turbine Engine
A. Soudarev* (EST, Russia), P. Avran, E. Vinogradov, Y. Zakharov, V. Grishaev
Development of Catalytic Combustion Technology for Single-Digit Emissions Industrial Gas Turbines
K.W. Beebe (GE Co., USA), K.D. Caims*, V.K. Pareek, S.G. Nickolas, J.C. Schlatter, T. Tsuchiya
Interplay between Fuel Spray and Swirling Air Flow in a Hybrid Atomizer with Dual Swirlers
W.S. Seol (Korea Aerospace Research Institute, Korea), Y.M. Han*, D.S. Lee
-----------------------------------------------------------------------------------------------------
November 16 (Tue) 15:10-17:15 Room C
Chairpersons: Dr. P. Avran (ONERA, France), Dr. T. Fujimori (Ishikawajima-Harima Heavy Industries Co., Ltd.)
Numerical Computation of Turbulent Non-Premixed Reacting Flows in Combustion Chambers
P. Adami* (University of Florence, Italy), F. Martelli
Numerical Simulation of a Simplified Gas Turbine Engine Combustor Flow Using Modified k-e and k-e-v'2 Turbulence Models
B. T. Kuan* (Royal Melbourne Institute of Technology, Australia), S. Abanteriba, N.S.A. Smith
A Numerical Simulation of Turbulent Premixed Flame Stabilized by a Pilot Flame and Bluff Body
S. Inage* (Hitachi, Ltd.), N, Kobayashi
Numerical Study on Combustion Flow around V-gutter Type Flame-holder of Methane-Fueled Ramjet Combustor
T. Yamamoto* (National Aerospace Laboratory), Y. Kurosawa, K. Suzuki, M. Gomi
CFD Predictions of Low NOx Lean Gas Turbine Radial Swirler Primary Zones
G.E. Andrews* (University of Leads, UK), N.H. Escott, M.N. Kim, M. Pourkashanian
-----------------------------------------------------------------------------------------------------
November 17 (Wed) 12:45-14:25 Room C
Chairpersons: Prof. D.E. Bohn (Aachen University of Technology, Germany), Dr. K. Mori (Kawasaki Heavy-Industries, Ltd.)
Application of Short-Flame/Quick-Quench Combustion Concept to Ultra-Low NOx Gas Turbine Combustors
H. Yamada (National Aerospace Laboratory), S. Hayashi*, M. Makida
Development of a Gas Turbine Lean-Premixed Low-NOx Combustor for Cogeneration Systems with Variable Heat-Power Ratio
I. Fukuda* (Tokyo Gas Co., Ltd.), M. Mori
Study of the Effects of Atomization Characteristics on NOx Emission for Airblast Atomizer with Premixed/Prevaporized tube
T. Saitou* (Ishikawajima-Harima Heavy Industries Co., Ltd.), T. Fujimori
Combustion Characteristics of Multi-Fuels in a Pre-Vaporizing Pre-Mixing Lean Combustor for an Automotive Ceramic Gas Turbine
Y. Yoshida* (Japan Automobile Research Institute), S. Hayashi, M. Oguchi
-----------------------------------------------------------------------------------------------------
November 17 (Wed) 14:45-16:25 Room C
Chairpersons: Prof. C.E. Lee (Inha Univ., Korea), Prof. O. Kawaguchi (Keio Univ.)
Development of a Dry, Low-NOx Combustor for a 650 kW-Class Gas Turbine
M. Ogata* (Kawasaki Heavy Industries, Ltd.), S. Kajita, T. Kimura, A. Okuto, Y. Douura, M. Hishinuma, N. Fukatani, Y. Asano
Research and Development of Swirling Flow Combustor for Low NOx
S. Takahashi* (Research Institute of Advanced Material Gas-Generator), Y. Enzaki, M. Kawano, N. Aruga, H. Ogata
A Development of Low NOx Combustion in Medium-Btu Fueled 1300oC- Class Gas Turbine Combustor in IGCC
T. Hasegawa* (Central Research Institute of Electric Power Industry), T. Hisamitsu, Y. Katsuki, M. Sato, Y. Iwai, A. Onoda, M. Utsunomiya
Ultra Low NOx Gas Turbine Combustion
G. E. Andrews* (University of Leeds, UK), H.S. Alkabie, R.J. Bideau, M. N. Kim
-----------------------------------------------------------------------------------------------------
November 17 (Wed) 16:45-18:00 Room C
Chairpersons: Prof. H. H. Cho (Yonsei Univ., Korea), Dr. M. Sato (Central Research Institute of Electric Power Industry)
Characterization of Combustion Oscillations in Premix Gas Turbine Combustors
S. Yamanaka* (Toshiba Corporation), F. Maeda, T. Tsuchiya, M. Shimizu
Flame Structure of Very Lean Low NOx Radial Swirl Stabilised High Intensity Combustion
G.E. Andrews*, (University of Leeds, UK), N.H. Escott M,N. Kim, M. Pourkashanian
NOx Formation Characteristics of Methane Jet Flames
C.E. Leek (Inha University, Korea), C.B. Oh, Y.H. Choi, O.Y. Yang
-----------------------------------------------------------------------------------------------------
November 18 (Thu) 10:20-12:00 Room C
Chairpersons: Prof. S.H. Kang (Seoul National Univ., Korea) Dr. Y. Fukuyama (Toshiba Corporation)
Long-Term Field Experience of Thermal Barrier Coating for Heavy Duty Gas Turbine
M. Ohara* (Mitsubishi Heavy Industries, Ltd.), K. Takahashi, T. Torigoe, K. Yamaguchi
Numerical Conjugate Flow and Heat Transfer Investigation of a Transonic Convection-Cooled Turbine Guide Vane with Different Thermal Barrier Coatings
D.E. Bohn* (Aachen University of Technology, Germany), V.J. Becker, J. T. Kortmann
Heat Transfer Measurements of an Integrated Cooling Configuration Designed for Ultra-High Temperature Turbine Blades
K. Funazaki* (Iwate University), N. Imamatsu, S. Yamawaki
Effects of Orientation Angles on Film Cooling over a Flat Plate: Heat Transfer Coefficient Ratio and Heat Flux Ratio
I.S. Jung (Seoul National University, Korea), J.S, Lee*
-----------------------------------------------------------------------------------------------------
Session C-10 Turbine Cooling 2
November 18 (Thu) 13:00-14:15 Room C
Chairpersons: Prof. J.S. Lee(Seoul National Univ., Korea), Dr. K. Takeishi (Mitsubishi Heavy Industries, Ltd.)
3D Laser Anemometry in a Rotating Cooling Ribbed U-Channel
Y. Servouze* (Office National d'Etudes et de Recherches, France), P. Gicquel, E. Saccardi, B. Tanguy, V. Sauter
Heat Transfer Distribution and Flow Behavior in a Rectangular Rib-Roughened Passage for the Parallel and Staggered Rib Arrangements
R. Kiml* (Tokyo University of Agriculture and Technology), S. Mochizuki, A. Murata, J. Nozicka
Influence of Endwall Phenomena on Leading Edge Ejection
D.E. Bohn* (Aachen University of Technology, Germany), K.A. Kusterer
-----------------------------------------------------------------------------------------------------
Session D-1 Control of Unsteady Flow and Noise
November 15 (Mon) 13:00-14:40 Room D
Chairpersons: Prof. E.M. Greitzer (Massachusetts Institute of Technology, USA), Dr. Y. Maruta (EBARA Research Co., Ltd.)
Acoustic Suppression of Tone Noise and Blade Force Due to Gust-Rotor Interaction
M.Namba* (Kumamoto Institute of Technology), N. Yamasaki, A.Murahashi
Active Control of Rotating Stall in a Single Stage Axial Flow Compressor Using Airjets
Q.H. Nagpurwala* (National Aerospace Laboratories, India), S.A. Guruprasad
Study on the Noise Reduction in a Turbofan
S. Suzuki (Hosei University). S. Mizuki, G. Minorikawa*, Y, Inayama, H.To
Active Control of Blade Flutter Using Acoustic Liner with Adjustable Impedance
H. Zhao (Beijing University of Aeronautics and Astronautics, Box407, P.R, China), X. Jing, X. Sun*
-----------------------------------------------------------------------------------------------------
November 15 (Mon) 15:00-16:15 Room D
Chairpersons: Prof. M. Rautenberg (Univ. of Hannover, Germany), Prof. C. Arakawa (The Univ. of Tokyo)
Application of Low Solidity Diffuser for High Pressure Ratio Centrifugal Compressor
H. Tamaki* (Ishikawajima-Harima Heavy Industries Co., Ltd.)
Summary Results of Design and Investigation of Eight Low Solidity Vaned Diffusers for a Centrifugal Compressor
A. Engeda* (Michigan State University, USA)
Experimental Study of Axial Inlet, Radial Outlet Annular Diffuser Flow Characteristics
K. Nakano* (Ishikawajima-Harima Heavy Industries Co., Ltd.), N, Ijichi
-----------------------------------------------------------------------------------------------------
November 16 (Tue) 10:20-12:00 Room D
Chairpersons: Prof. A. Engeda (Michigan State Univ., USA) Dr. Y. Kawata (Mitsubishi Heavy Industries, Co., Ltd.)
A Control of Horseshoe Vortex around a Wing by a Pair of Vortex Generators
T. Shizawa* (Science University of Tokyo), M. Takahashi, H, Hara, S. Honami
Effects of Blade Surface Roughness on Pressure Loss in Compressor Blade Rows
H. Hirata* (Toshiba Corporation), R. Kubo, T. Tsuchiya, M. Shimizu
Numerical Predictions of Leakage Flow over Shrouded Turbine Blades
Y. Xiao (University of Wisconsin-Milwaukee, USA), R.S. Amano*
Improvement of Internal Flow in a Gas Turbine Inlet Casing
T. Suyama* (Mitsui Engineering & Shipbuilding Co., Ltd.), Y, Kodera, T. Takagi, F. Kusunoki
-----------------------------------------------------------------------------------------------------
Session D-4 Maintenance and Control 1
November 16 (Tue) 13:10-14:50 Room D
Chairpersons: Dr. M.L. Parker (Rolls-Royce Industrial & Marine Gas Turbines Limited, UK), Prof. K. Teshima (Kyoto Univ.)
Real-Time Simulation of Aviation Engines for FADEC Test-Beds
G.G. Kulikov (Ufa State Aviation Technical University, Russia), T. V. Breikin*, V. Y. Arkov, P.J. Fleming
Lifetime Prediction of SN282 under Biaxial Stress State
T. Ono* (Kyocera Corporation), S. Nakagawa, M. Nishimura
Operating Factors of Gas Turbine Components Total Equivalent Operating Hours (TEOH)
J. H. Lee* (P.C. Engineering Company, Korea)
Cost Effective Gas Turbine Maintenance through Component Repair
J.S. Dodgson* (Wood Group Gas Turbines Ltd., UK), R. van der Voort, A.D. Williams
-----------------------------------------------------------------------------------------------------
Session D-5 Maintenance and Control 2
November 16 (Tue) 15:10-17:15 Room D
Chairpersons: Mr. J.S. Dodgson (Wood Group Gas Turbines Ltd., UK), Dr. Y. Yoshioka (Toshiba Corporation)
Operating Experience and Lifetime Assessment of 69MW Gas Turbine Power Plant in Fuji Gas Turbine Research Center
T. Ikeda* (Fuji Electric Co., Ltd.), T. Iwakura, H. Nishimoto
Residual Life Assessment Based on Crack Growth Analysis of Gas Turbine First-Stage Nozzles
N. Isobe* (Hitachi, Ltd.), S. Sakurai, H. Nishida, H. Yamaguchi
High-Cycle Fatigue Failure Modeling and the Endurance Prediction of Ni-Base Superalloy Protective Coatings
M. Okazaki* (University of Tokyo), T. Sadasue, M. Saitoh
Material Degradation and Damage Assessment for Gas Turbine Transition Pieces
D. Saito* (Toshiba Corporation), Y. Yoshioka, K. Fujiyama, H. Kashiwaya
Damage and Life Evaluation for Hot Section Components of Mitsui Gas Turbines
K. Namba* (Mitsui Engineering & Shipbuilding Co., Ltd.), K. Kamata, T. Jibiki, T. Takagi, K. Miura
-----------------------------------------------------------------------------------------------------
November 17 (Wed) 12:45-14:25 Room D
Chairpersons: Prof. S. J. Song (Seoul National Univ., Korea), Prof. T. Iwatsubo (Kobe Univ.)
Effect of Fin Overlap on Seal Characteristics of a Gas Turbine Rotor Stator System
K. Ishida* (Kawasaki Heavy Industries, Ltd.),
Cylindrical Roller Bearing with Advanced Material
K. Fujii* (Research Institute of Advanced Material Gas-Generator), M. Mori, S. Yamamoto
The Performance of Hybrid Ball Bearings under High-Temperature and High-Speed Conditions
H. Yui* (Research Institute of Advanced Material Gas-Generator), S. Aihara, S. Yamamoto, M. Yamazoe
Development of a High-Temperature, High-Speed Seal for an Advanced Gas-Generator Use
T. Kono* (Research Institute of Advanced Material Gas-Generator), M. Murakami, S. Matsui, H. Osada, K. Okada, S. Yamamoto
-----------------------------------------------------------------------------------------------------
November 17 (Wed) 14:45-16:50 Room D
Chairpersons: Dr. H. Pucher (Technical University of Berlin, Germany), Prof. M. Okazaki (Univ. of Tokyo)
Development of CMC Bladed Disk for Advanced Gas-Generator
Y. Nojima* (Research Institute of Advanced Material Gas-Generator), T. Araki, Y. Saida, N. Suzumura, O. Funatogawa, S. Nishide, K. Yasuhira
Advanced Ceramic Matrix Composites and Silicon Nitride Materials for Gas Turbine Applications
J. Garnier* (AlliedSignal Composites Inc. (ACI), USA), P. Gray, D, Foley
Creep Deformation and Lifetime Prediction in Advanced Silicon Nitride Ceramics
Y. Takigawa* (Japan Fine Ceramics Center), J.W. Cao, Y. Ikeda, H. Kawamoto
Development of a Combustor Liner Composed of Ceramic Matrix Composites (CMC)
K. Nishio* (Research Institute of Advanced Material Gas-Generator), K. Igashira, G. Matsubara, T. Suemitsu
The Development of New Ni-Base Superalloy (MGA2400) for 1500oC Class Gas Turbine Vane
I. Okada (Mitsubishi Heavy Industries, Ltd.), T. Torigoe*, M. Kanikawa, H. Kawai, K. Takahashi, I. Tamura
-----------------------------------------------------------------------------------------------------
Session D-8 Small Gas Turbine System
November 18 (Thu) 10:20-11:35 Room D
Chairpersons: Mr. M. V. Roode (Solar Turbines Incorporated, USA), Prof. T. Ito (Tokai Univ.)
Operating Characteristics of a Hydrogen Feed System Using Metal Hydride for a Hydrogen-Fueled Micro Gas Turbine
S. Yuasa* (Tokyo Metropolitan Institute of Technology), N. Goto, K. Nishida, M. Shigeta, K. Minakawa
A Study of a Small Gas Turbine Engine for Mini-Cogeneration System
M. Sakakida* (Ishikawajima-Harima Heavy Industries Co., Ltd.), Y. Obikane, M. Nakamura, O. Kawaguchi, M. Koyama, I. Ariga
A Feasibility Study of 100kW CGT Turbo Generator and Its Application
S. Hayashi* (Nissan Motor Co., Ltd.), Y. Fujikawa, H. Kaya, K. Hatano
-----------------------------------------------------------------------------------------------------