1987 Tokyo International Gas Turbine Congress and Exhibition
Yu-Port, Oct. 26-30, 1987
-----------------------------------------------------------------------------------------------------
Special Lecture I
October 26 (Monday) 11:00-12:00 Room I
Chairman: Prof. Masakatsu Matsuki(Nippon Institute of Technology, Japan)
Development of Advanced Gas Turbines in Japan
Mr. Kiichiro Yamagishi (Ministry of International Trade and Industry, Japan)
Special Lecture II
October 27 (Tuesday) 13:30-14:30 Room I
Chairman: Prof. Hiroyuki Takata (University of Tokyo, Japan)
Unsteady Flows in Turbomachines: Recent Advances and Opportunities for Control
Prof. Edward M. Greitzer (Massachusetts Institute of Technology, USA)
Special Lecture III
October 28 (Wednesday) 13:30-14:30 Room I
Chairman: Mr. Osamu Kawata (Fuji Electric Co., Ltd., Japan)
Development and Application of Highly Efficient Heavy Duty Gas Turbines in Europe
Mr. Helmut Maghon (Kraftwerk Union A.G., FRG)
-----------------------------------------------------------------------------------------------------
October 29 (Thursday) 13:30-16:30 Room I
Chairmen: Dr. Masashi Akiba (Toshiba Corporation, Japan), Prof. Ennio Macchi (Politecnico di Milano)
Operating Experiences of Combined Cycle Plants
Panelists:
Construction History and Operation Records of the Futtsu Thermal Power Station (IGTC-13)
Mr. Mitsuo Arakawa (Tokyo Electric Power Co., Inc., Japan)
Electrical Power for the Future via Syngas Integrated Gasification Combined-Cycle Power Production (IGTC-124)
Mr. Robert S. Currie, Jr. (Southern California Edison Co., USA),
Operating Experience with a Large Combined Cycle Power Station (IGTC-125)
Mr. Daniel K. Jesuthasan (National Electricity Board, Malaysia)
Brown Boveri Experiences of Combined Cycle Plants (IGTC-l26)
Mr. Rolf Kehlhofer (BBC Brown Boveri Ltd., Switzerland)
The Application of the British Gas/Lurgi Slagging Gasifier for Integrated Coal Gasification Combined Cycle Power Generation (IGTC-127)
Dr. B. H. Thompson (British Gas plc, UK)
Operating Results of Gas-Steam Combined Cycle plant for Higashi Niigata Thermal Power Station No.3 (IGTC-l28)
Mr. Michio Yamashita (Tohoku Electric Power Co., Inc., Japan)
-----------------------------------------------------------------------------------------------------
Organized Session I IMPROVEMENTS OF GAS TURBINE ENGINES IN AIRCRAFT APPLICATIONS
Oct. 27 (Tuesday) 15:00-17:00 Room I
Chairmen: Mr. P. Avran (ONERA, France), Mr. C. Aoki (Ishikawajima-Harima Heavy Industries, Japan)
IGTC-101
Development of the XF3-30 Turbofan Engine
H. Yamada, H. Hamatani, *K. Ishizawa (Ishikawajima-Harima Heavy Industries, Japan)
IGTC-102
Application of Advanced Technology to Modern Military Turbofan Engines
*B. J. Quinn (Rolls-Royce, UK)
IGTC-103
V2500 Engine Collaboration
M. Itoh, *G. E. Kirk (Rolls-Royce, UK),
IGTC-104
Prop-Fan Propulsion Technology
*B. S. Gatzen (Hamilton Standard, USA)
Future Trends of Aircraft Engines for Commercial Use (Oral Presentation)
*B. J. Gordon (General Electric, USA)
-----------------------------------------------------------------------------------------------------
Organized Session II IMPROVEMENTS IN TURBOCHARGERS
Oct.27 (Tuesday) 15:00-17:00 Room III
Chairmen: Dr. F. S. Bhinder (Hatfield Polytecnic, UK), Dr. H. Yoshiki (Univ. of Tokyo, Japan)
IGTC-105
Adiabatic and Non-Adiabatic Efficiencies of Small Turbocharger Turbines
*M. Malobabic (Univ. of Hannover, FRG), M. Routenberg
IGTC-106
Development of High Performance Radial Turbine Blades
*E. Matsuo (Mitsubishi Heavy Industries, Japan), N. Matsudaira, K. Imakiire
IGTC-107
Development of High Specific Speed Turbocharger for Passenger Cars
T. Ohkuwa, W. Saito (Ishikawajima-Harima Heavy Industries, Japan), H. Tamaki, H. Yamaguchi, N. Misaki, K. Kurata
IGTC-108
Application of a Turbocharger with Improved Compressor Performance and Electronically Controlled Waste Gate Valve for Heavy Duty Truck Engine
*A. Sato (Hino Motors, Ltd., Japan), T. Otani, K. Harada, M. Shimizu
IGTC-109
Organic-Fluid Turbocharger for a 2000kw Diesel Engines
*G. Cerri (Univ. of Rome "La Sapienza", Italy)
-----------------------------------------------------------------------------------------------------
Organized Session III ENERGY SAVING SYSTEMS AND COGENERATION
Oct. 28 (Wednesday) 15:00-17:30 Room I
Chairmen: Prof. G. Cerri (Univ. di Roma "La Sapienza", Italy), Dr. Y. Otsuki (Kawasaki Heavy Industries, Japan)
IGTC-110
An Optimal Operational Planning Model for Gas Turbine Cogeneration Plants
*K. Ito (Osaka Univ., Japan), R. Yokoyama, S. Horii, Y. Matsumoto, S. Akagi
IGTC-111
Repowering with IM5000 Gas Turbines Improves Cogeneration at Dow Chemical Stade
*M. Aumann (Dow Chemical, FRG)
IGTC-112
Cogeneration Plant Using Gas Turbine Model SB-60
Y. Omote, *G. Taguchi (Mitsui Engineering & Shipbuilding, Japan)
IGTC-113
Cogeneration Application of 12MW Class Heavy Duty Gas Turbine MF-111
Y. Mori, K. Hasegawa, *K. Mikata (Mitsubishi Heavy Industries, Japan), T. Ikegami
IGTC-114
3MW Gas Turbine Cogeneration System for District Heating and Cooling
T. Jo, Y. Nishino, T. Kobayashi, *H. Matsumura (Hitachi Zosen Corp., Japan)
IGTC-115
High Overall Efficiency Cogeneration Plant with MIA-03 Gas Turbine at Bardusch, Ettlingen
*H. K. Kh'nkmann (Consultant, Switzerland)
IGTC-116
Small Gas Turbine Cogeneration System for Hotel Use in Okinawa
*Y. Sanada (Hibiya Engineering, Ltd., Japan)
-----------------------------------------------------------------------------------------------------
Organized Session IV CERAMICS FOR GAS TURBINES AND TURBOCHARGERS
Oct. 28 (Wednesday) 15:00-17:30 Room III
Chairmen: Dr. Y. Hamano (Kyocera Corp., Japan), Mr. M. Iwai (Toyota Motors Corp., Japan)
IGTC-117
Injection Molding of Sic Turbocharger Rotor
*S. Wada (Toyota Central R&D Lab., Japan), H. Masaki, T. Honma, T. Tani
IGTC-118
Dynamic Fatigue of Sintered Si3N4
I. Oda, M. Matsui, *T. Soma (NGK Insulators, Ltd., Japan)
IGTC-119
Application of X-Ray CT Scanner to Nondestructive Testing
Y. Tanimoto, S. Tanaka, *M. Tomizawa (Toshiba Corp., Japan)
IGTC-120
Ceramic Turbine Blades and Heat Exchangers - Theory and Experimental Results
*P. Avran (ONERA, France), S. Boudigues
IGTC-121
Manufacturing and Hot Rig Testing of Ceramics Vanes for Gas Turbines
A. Ohkoshi, N. Watanabe, *I. Tsuji (Mitsubishi Heavy Industries, Japan), K. Tsukagoshi, H. Kawai
IGTC-122
Hot Gas Spin Testing of Ceramic Radial Turbine Rotors
*Y. Kobayashi (Mitsubishi Motors Corp., Japan), J. Miyauchi, E. Matsuo. T. Inagaki
-----------------------------------------------------------------------------------------------------
Session A-1 AERODYNAMICS I (Radial Flow)
Oct. 26 (Monday) 13:30-15:10 Room I
Chairmen: Prof. I. Teipel (Univ. of Hannover, FRG), Prof. E. Outa (Waseda Univ., Japan)
IGTC-1
Compressor Performance Influenced by Distribution of Tip Clearance of Mixed Flow Impeller
*H. Hayami (Kyushu Univ., Japan), Y. Senoo, H. Hasegawa
IGTC-2
Flow Study in Radial Impellers Using a Laser Doppler Velocimeter
*H. Higashimori (Mitsubishi Heavy Industries, Japan), E. Matsuo, M. Noda
IGTC-3
Experimental Investigation of a Backswept Centrifugal Compressor Impeller
*Z.-G. Diao (Inst. of Engineering Thermophysics, China), J.-Y. Chen, X.-J. Cao
IGTC-4
Some Aero-Thermodynamic Considerations for the Design of Small Gas Turbines
*F.S. Bhinder(Hatfield Polytechnic, UK)
-----------------------------------------------------------------------------------------------------
Session A-2 AERODYNAMlCS II (Radial Flow)
Oct. 26 (Monday) 15:40-17:20 Room I
Chairmen: Prof. I. Teipel (Univ. of Hannover, FRG) Prof. E. Outa (Waseda Univ., Japan)
IGTC-5
A Consideration of Blade Loading Criteria for Radial Inflow Turbines
*T. Takamura (Nissan Motor, Japan), T. Itoh
IGTC-6
Comparative Study of Four Prediction Methods for Radial Vaneless Diffusers
*R. A. Van den Braembussche (von Karman Inst. for Fluid Dynamics, Belgium), M. Th. Sideris, V. A. Soumoy
IGTC-7
On the Use of Numerical Optimisation in Designing the Radial Impellers for Centrifugal Compressors
*F. S. Bhinder (Hatfield Polytechnic, UK), T. Mashimo, S.N. Jawad
IGTC-8
Development of Radial-Inflow Turbines for Turbochargers
T. Ohkuwa, *M. Sakakida (Ishikawajima-Harima Heavy Industries, Japan), K. Miyashita, M. Yumoto, K. Funayama, K. Kurata
-----------------------------------------------------------------------------------------------------
Session A-3 AERODYNAMICS III (Radial Flow)
Oct. 27 (Tuesday) 10:30-12:00 Room I
Chairmen: Prof. Z. -Q. Wang (Harbin Inst. of Technology, China), Prof. H. Hayami (Kyushu Univ., Japan)
IGTC-9
Experimental Study on the Three-Dimensional Flow Filed in a Turbine Scroll
M. Inoue, *K. Hara (Kyushu Univ., Japan), M. Furukawa
IGTC-10
Centrifugal Impeller Response to a Circumferential Variation of Exit Pressure
M. Th. Sideris, Y. Ayaz, *R.A. Van den Braembussche (von Karman Ins. for Fluid Dynamics, Belgium)
IGTC-11
Effect of a Circumferential Static Pressure Distortion on Small-sized Centrifugal Compressor Performance
*H. Uchida (Toyota Central R&D Lab., Japan), M. Inayoshi, K. Sugiyama
IGTC-12
Experimental Investigation of Flow Field at the Exit of a Backward Curved Centrifugal Impeller
*T. Jiang (Xian Jiaotong Univ., China), Z. Yuan, Z. -L. Li
-----------------------------------------------------------------------------------------------------
Session A-4 AERODYNAMICS IV (Turbomachinery)
Oct. 26 (Monday) 13:30-15:10 Room II
Chairmen: Prof. T. H. Okiishi (Iowa State Univ., USA), Mr. S. Nagano (Ishikawajima-Harima Heavy Industries, Japan)
IGTC-13
Development of Casing Wall Boundary Layer through an Axial Compressor Rotor
*M. Inoue (Kyushu Univ., Japan), M. Kuroumaru, M. Fukuhara
IGTC-14
An Experimental Study on Annulus Blockage Prediction in Axial Flow Compressors
N. Yamaguchi, *T. Tominaga (Mitsubishi Heavy Industries, Japan)
IGTC-15
An Experimental Study on Separated Flow of Large Negative Incidence in 2-D Turbine Cascade
*D. -J. Ye (Tsinghua Univ., China), W.-D. Liu, L. -W. Zhou
-----------------------------------------------------------------------------------------------------
Session A-5 AERODYNAMICS V (Turbomachinery)
Oct. 26 (Monday) 15:40-17:20 Room II
Chairmen: Prof. T. H. Okiishi (Iowa State Univ., USA), Mr. S. Nagano (Ishikawajima-Harima Heavy Industries, Japan)
IGTC-16
Effects of Blade Boundary Layer Fences on Secondary Flow and Losses in a Turbine Cascade
*T. Kawai (Univ. of Tsukuba, Japan), T. Adachi
IGTC-17
Secondary Flow Development Downstream of a Transonic Cascade
F. Bassi, *A Perdichizzi (Politecnico di Milano, Italy)
IGTC-18
An Experimental Investigation into Controlling the Secondary Flow in Turbine Cascades with Leaned Blades and Divergent Outer Wall
*Z.-Q. Wang (Harbin Inst. of Technology, China), W.-J. Han, W.-Y. Xu, J. Bai
-----------------------------------------------------------------------------------------------------
Session A-6 AERODYNAMICS VI (Turbomachinery)
Oct. 27 (Tuesday) 9:00-10:15 Room II
Chairmen: Prof. R. L. Elder (Cranfield Inst. of Technology, UK), Prof. M. Namba (Kyushu Univ., Japan)
IGTC-19
Optimization of the Arrangement of the Front and Rear Blade Rows of a Tandem Blade Cascade
*G.-C. Wu (Nanjing Aeronautical Inst., China), Q.Feng
IGTC-20
Comparison of Predicted and Measured Axial-Flow Compressor Blade-Section Profile Loss
B. W. Batson, *T. H. Okiishi (Iowa State Univ., USA)
IGTC-21
Measurement of Internal Flow in Axial Flow Turbines Using Data Acquisition and Processing System
Y. Kawasaki, *T. Isozaki (Kawasaki Heavy Industries, Japan), H. Hanafusa, A. Takehira
-----------------------------------------------------------------------------------------------------
Session A-7 UNSTEADY AERODYNAMICS I
Oct. 27 (Tuesday) 10:30-12:00 Room II
Chairmen: Prof. R. L. Elder (Cranfield Inst. of Technology, UK), Prof. M. Namba (Kyushu Univ., Japan)
IGTC-22
On the Nature of Rotating Stall in Centrifugal Compressors with Vaned Diffusers -Part l: Detection of Reverse Flow
*U. Haupt (Univ. of Hannover, FRG), Y. N. Chen, M. Rautenberg
IGTC-23
On the Nature of Rotating Stall in Centrifugal Compressors with Vaned Diffusers - Part II : Karman Vortices as the Controlling Mechanism
Y. N. Chen, *U. Haupt (Univ. of Hannover, FRG), M. Rautenberg
IGTC-24
Performance of Radial Exhaust Turbine Driven by Pulsating Flow
*D. Sekita (Mitsubishi Research Inst. Inc., Japan), H. Yoshiki, T. Endoh, N. Takama
-----------------------------------------------------------------------------------------------------
Session A-8 UNSTEADY AERODYNAMICS II
Oct. 28 (Wednesday) 9:00-10:15 Room II
Chairmen: Prof. R. A. Van den Braembussche (von Karman Inst., Belgium), Prof. S. Kaji (Univ. of Tokyo, Japan)
IGTC-25
The Stability of Split Flow Fans
E. Tzannatos, *R. L. Elder (Cranfield Inst. of Technology, UK)
IGTC-26
An Investigation of Rotating Stall and Surge in Industrial Axial-Flow Compressors
*V. Svoboda (CKD Praha, Czechoslovakia)
IGTC-27
Sound Absorbing Wall Effect on Unsteady Aerodynamic Characteristics of Cascade
*N. Yamasaki (Kyushu Univ., Japan), M. Namba
-----------------------------------------------------------------------------------------------------
Session A-9 UNSTEADY AERODYNAMICS III
Oct. 28 (Wednesday) 10:30-12:00 Room II
Chairmen: Prof. R.A. Van den Braembussche (von Karman Inst., Belgium), Prof. S. Kaji (Univ. of Tokyo, Japan)
IGTC.28
Evaluation of Acoustic Impedance Models for a Perforated Plate
*M. Watanabe (National Aerospace Lab., Japan)
IGTC-29
Theoretical and Experimental Study: Effects of Acoustic Perturbation on Turbulent Pipe Flows
L. M. Portela, *M. N. Frota (Pontificia Universidade Catolica do Rio de Janeiro, Brazil)
IGTC-30
Blade Passing Frequency Noise Induced by Flow around Cut-off of Scroll in a Centrifugal Fan
*Y. Ohta (Waseda Univ., Japan), E. Outa. K. Tajima
-----------------------------------------------------------------------------------------------------
Session A-10 COMPUTATIONAL AERODYNAMICS I
Oct. 28 (Wednesday) 9:00-10:15 Room I
Chairmen: Prof. F. Martelli (Universita di Firenze, Italy), Mr. T. Sato (Mitsubishi Heavy Industries, Japan)
IGTC-31
Upwind Euler Solver for Blade to Blade Flow Calculation
*L. Zannetti (Politecnico di Torino, Italy), S. Daniele
IGTC-32
The Variational Finite Element for Solving the Aerodynamic Direct Problems of Flow on a S2-Streamsheet in Mixed-Flow Turbomachines and the
Application in Calculation of Quasi-Three Dimensional Flow
*K.-M. Chen (Shanghai Inst. of Mechanical Engineering, China), Y.-L. Chen, L.-F. Xiang
IGTC-33
A Simulation of Unsteady Cascade Flow Using Semi-Implicit Runge-Kutta Method
*H. Shirahata (Tohoku Univ., Japan)
-----------------------------------------------------------------------------------------------------
Session A-11 COMPUTATIONAL AERODYNAMICS II
Oct. 28 (Wednesday) 10:30-12:00 Room I
Chairmen: Prof. F. Martelli (Universita di Firenze, Italy), Mr. T. Sato (Mitsubishi Heavy Industries, Japan)
IGTC-34
A Unified Variable-Domain Variational Theory of Hybrid Problems for Compressible S2-Flow in Mixed-Flow Turbomachinery
*G.-L. Liu (Shanghai Inst. of Mechanical Engineering, China)
IDTC-35
A Numerical Method of S3 Surfaces for Compressible 3D Flows in Arbitrary Turbomachines: An Application of Exact Solution by Pseudo-Analytic Function Theories
*T. Miyazaki (Kokushikan Univ., Japan)
IGTC-36
A Three-Dimensional Inverse Calculation of an Axial-Flow Rotor by Finite-Pitch Actuator Duct Method
*K. Bando (Osaka Univ., Japan): Y. Miyake, M. Kurokawa
-----------------------------------------------------------------------------------------------------
Session A-12 COMPUTATIONAL AERODYNAMICS III
Oct. 29 (Thursday) 9:00-10:15 Room I
Chairmen: Prof. L. Zannetti (Politecnico di Torino, Italy), Prof. Y. Miyake (Osaka Univ., Japan)
IGTC-37
An Improved Method of Transonic Stream-Function/Density Iteration and Calculation of Total Pressure Loss
*B. -G. Wang (Inst. of Engineering Thermophysics, China), Y. N. Hua
IGTC-38 Internal Viscous Flow Computations by Zonal Method
*K. Nakahashi (National Aerospace Lab., Japan), K. Kikuchi, A. Tamura
IGTC-39
Computation of Transonic Cascade Flow Using the Euler and Navier-Stokes Equations of Contravariant Velocities
*S. Yamamoto (Tohoku Univ., Japan), H. Daiguji, K. Ito
-----------------------------------------------------------------------------------------------------
Session A-13 COMPUTATIONAL AERODYNAMICS IV
Oct. 29 (Thursday) 10:30-12:00 Room I
Chairmen: Prof. L. Zannetti (Politecnico di Torino, Italy), Prof. Y. Miyake (Osaka Univ., Japan)
IGTC-40
Unsteady Forces in Blade Cascade by a Finite Element Approach
*F. Martelli (Univ. di Firenze, Italy)
IGTC-41
Computation of Flowfields in Centrifugal Compressor Diffusers with Splitter Vanes
*I. Teipel (Univ. of Hannover, FRG), A. Wiedermann
IGTC-42
Three Dimensional Inviscid and Viscous Flow Field Analysis of Low Solidity Annular Turbine Nozzle
T. Sato, S. Aoki, *H. Mori (Mitsubishi Heavy Industries, Japan), A. Sugiyama, K. Takeda
IGTC-43
Numerical Analysis of Three Dimensional Cascade Flow by Solving Navier-Stokes Equations
*O. Nozaki (National Aerospace Lab., Japan), K. Nakahashi, A. Tamura
-----------------------------------------------------------------------------------------------------
Oct. 26 (Monday) 13:30-15:10 Room III
Chairmen: Prof. O. Kawaguchi (Keio Univ., Japan), Dr. T. Tamaru (National Aerospace Lab. , Japan)
IGTC-44
Burning Velocities of Premixed Sprays and their Coburning Characteristics
*K. Nakabe (Osaka Univ., Japan), Y. Mizutani, S. Tanimura
IGTC-45
Counter Rotating Double Swirl Stabilised Flames
N. T. Ahmad, *G. E. Andrews (Univ. of Leeds, UK), M. Kowkabi
IGTC-46
Turbulent Free Diffusion Flames with Swirling Flow
*Ok-yoang Yang (Inha Univ., Korea), Keun-oh Lee, Chang-eon Lee
IGTC-47
Measurement of Temperature and Density Distributions of a Jet Flame by an Infrared Radiation CT
*S. Shimizu (Gifu Univ., Japan), S. Sakai, K. Wakai
-----------------------------------------------------------------------------------------------------
Oct. 26 (Monday) 15:40-17:20 Room III
Chairmen: Prof. O. Kawaguchi (Keio Univ., Japan), Dr. T. Tamaru (National Aerospace Lab., Japan)
IGTC-48
Flow Characteristics of Mixing Process of Dilution Air in a Premixing Gas Turbine Combustor
*Y. Ikeda (Kobe Univ., Japan), T. Nakajima, R. Matsumoto, T. Yamazaki, N. Horikawa
IGTC-49
The Thermal Degradation of Aviation Fuels in Jet Engine Injector Feed-Arms: Part I - Results from a Full-Scale Rig
*D. R. Kendall (Shell Research, UK), G. Houlbrook, R. H. Clark, S.P. Bullock, C. Lewis
IGTC-50
A Test Research on Gapped V-gutter Flameholder
*H. -Y. Tan (Nanjing Aeronautical Inst., China), J.-H. Wang
IGTC-51
Design and Test of a Catalytic Combustor Fuel-Air Preparation System
*K. W. Beebe (General Electric, USA), A. Ohkoshi, L. J. Radak, A. Weir, Jr.
-----------------------------------------------------------------------------------------------------
Oct. 29 (Thursday) 10:30-12:00 Room II
Chairmen: Dr. D. R. Kendall (Shell Research, UK), Mr. M. Kuroda (Hitachi, Ltd., Japan)
IGTC-52
Study on Ultrasonic Atomizer for Use on Small Size Gas Turbine Combustor
*K. Nakayama (Toa Nenryo Kogyo, Japan), K. Kokubo, H. Takenaka, O. Kawaguchi
IGTC-53
Spray Characteristics of Swirl Atomizer at Pressurized Conditions
*H. Hiroyasu (Univ. of Hiroshima, Japan), M. Arai, K. Atarashiya
IGTC-54
Effects of Swirling Airflow and Divergence Angle of Airblast Atomizer on Atomizing Performance
*Q.-S. Zhao (Beijing Inst. of Aeronautics & Astronautics, China), Q.-C. Yuan. L.-J. Lin
-----------------------------------------------------------------------------------------------------
Oct. 27 (Tuesday) 10:30-12:00 Room III
Chairmen: Mr. K. W. Beebe (General Electric, USA), Mr. S. Mandai (Mitsubishi Heavy Industries, Japan)
IGTC-55
NOx Reduction Using Fuel-Bonded Nitrogen in Two-Stage Combustor for Regenerative Automotive Gas Turbine
*M. Sasaki (Nissan Motor, Japan), T. Itoh
IGTC-56
Lean Primary Zones: Pressure Loss and Residence Time Influences on Combustion Performance and NOx Emissions
M. M. Abdul Aziz, U. S. Abdul Hussain, N. A. AI Dabbagh, *G. E. Andrews(Univ. of Leeds, UK), A. R. Shahabadi
IGTC-57
Prediction of Soot Formation in Gas Turbine Combustors
*Y. S. H. Najjar (King Abdulaziz Univ., Saudi Arabia), R. M. Droubi
IGTC-58
NOx Abatement Measures for a Combined Cycle Plant
T. Sato, *M. B. Hilt (General Electric, USA)
-----------------------------------------------------------------------------------------------------
Session B-5 BLADE HEAT TRANSFER AND HEAT EXCHANGER
Oct. 27 (Tuesday) 9:00-10:15 Room III
Chairmen: Dr. K. Mori (Kawasaki Heavy Industries, Japan), Mr. T. Araki (Toshiba Research & Development Center, Japan)
IGTC-59
Effect of 3-D Flow Field on Heat Transfer Problems of a Low Aspect Ratio Turbine Nozzle
T. Sato, S. Aoki, *K. Takeishi (Mitsubishi Heavy Industries, Japan), M. Matsuura
IGTC-60
Measurements of Heat Transfer around Turbine Blades Using Boundary Element Method and Uncertainty Analysis (Part I )
*K. Funazaki (Ishikawajima-Harima Heavy Industries, Japan), T. Maya, S. Nagano
IGTC-61
Effects of Regenerator Performance on an Automotive GT Engine-Experimental Study on Regenerator Flow Friction Characteristics
M. Iwai, *J. Sayama (Toyota Motor Corp., Japan), A. Ishimaru
-----------------------------------------------------------------------------------------------------
Oct. 28 (Wednesday) 9:00-10:15 Room III
Chairmen: Prof. G. E. Andrews (Univ. of Leeds, UK), Dr. T. Yoshida (National Aerospace Lab., Japan)
IGTC-62
Heat Transfer in Turbo-Machinery
*F. J. Bayley (Univ. of Sussex, UK)
IGTC-63
High Temperature Wind Tunnel Testing of Film Cooled Blades *T. Araki (Toshiba Corp., Japan), Y. Nakata, S. Ito, Y. Fukuyama, F. Otomo
IGTC-64
Development of a Thermal Barrier Coated Blade with a New Cooling Air Passage Scheme for High Cooling Effectiveness
*A. Koga (Engineering Research Assoc. for Adv. Gas Turbines, Japan), K. Teshima, T. Hijikata, Y. Okamoto
-----------------------------------------------------------------------------------------------------
Oct. 28 (Wednesday) 10:30-12:00 Room III
Chairmen: Prof. G. E. Andrews (Univ. of Leeds, UK), Dr. T. Yoshida (National Aerospace Lab., Japan)
IGTC-65
Experimental Investigation of Blade Internal Cooling Methods Using Ribs and Fins
*M. Shizuya (Hitachi, Ltd., Japan), K. Kawaike
IGTC-66
Heat Transfer and Friction Loss Characteristics in a Serpentine Channel with Pin-Fins - An Investigation of Turbine Blade Cooling
*J. -R. Shen (Inst. of Engineering Thermophysics, China), Y. -M. Zhang. C. -C. Liu, W. -Z. Gu
IGTC-67
An Experimental Study for Endwall Cooling Design of Turbine Vanes
*H. Yamao (Engineering Research Assoc. for Adv. Gas Turbines, Japan), S. Aoki, K. Takeishi, K. Takeda
-----------------------------------------------------------------------------------------------------
Session B-8 TURBINE COOLING (AGTJ-100)
Oct. 29 (Thursday) 9:00-10:15 Room III
Chairmen: Prof. F. J. Bayley (Univ. of Sussex, UK), Mr. Y. Sato (Ishikawajima-Harima Heavy Industries, Japan)
IGTC-68
Cooling Design and Heat Transfer Analysis of Gas Turbine Blades for AGTJ-100A
*H. Usami (Engineering Research Assoc. for Adv. Gas Turbines, Japan), K. Teshima, A. Koga, M. Arai
IGTC-69
Design Study of Cooled Blades for The AGTJ-100B Using Pre-Cooling System
*Y. Inukai (Engineering Research Assoc. for Adv. Gas Turbines, Japan), K. Teshima, A. Koga, M. Arai
IGTC-70
Investigation of Turbine Disk Cooling on The AGTJ-100A
*T. Satoh (Engineering Research Assoc. for Adv. Gas Turbines, Japan), K. Teshima, K. Uchida, S. Inaba
-----------------------------------------------------------------------------------------------------
Oct. 29 (Thursday) 10:30-12:00 Room III
Chairmen: Prof. F. J. Bayley (Univ. of Sussex, UK), Mr. Y. Sato (Ishikawajima-Harima Heavy Industries, Japan)
IGTC-71
Full Coverage Film Cooling of a Flat Plate with Impinging Jets
*S. Kikkawa (Doshisha Univ., Japan), M. Kawashima
IGTC-72
A Study on Film Cooling-Behavior of a Cooling Jet over a Concave Surface
*S. Honami (Science Univ. of Tokyo, Japan), M. Fukagawa
IGTC-73
The Effects of Free Stream Turbulence on Full-Coverage Film Cooling
N. Kasagi, *K. Hosoya (Univ. of Tokyo, Japan), M. Hirata, Y. Suzuki
-----------------------------------------------------------------------------------------------------
Oct. 26 (Monday) 13:30-15:10 Room IV
Chairmen: Dr. A. Feuerstein (Leybold-Heraeus, FRG), Mr. T. Uemura (Kawasaki Heavy Industries, Japan)
IGTC-74
The High-Temperature Strengths of Single Crystal Superalloys for Gas Turbine
*M. Matsubara (Central Research Inst. of Electric Power Industry, Japan), A. Nitta, K. Kuwabara
IGTC-75
Recent Single Crystal Technology
*Y. G. Nakagawa (Ishikawajima-Harima Heavy Industries, Japan), Y. Ohta, S. Ohama
IGTC-76
Nickel-Base Single Crystal Superalloys Developed for a National Project in Japan
*T. Yamagata (National Research Inst. for Metals, Japan), H. Harada, M. Yamazaki
IGTC-77
Application of Single Crystal Technology
*A. G. Dodd (Rolls-Royce, UK), G. J. S. Higginbotham
-----------------------------------------------------------------------------------------------------
Oct. 26 (Monday) 15:40-17:20 Room IV
Chairmen: Mr. A. G. Dodd (Rolls-Royce, UK), Mr. D. Yoshida (Komatsu-Howmet, Ltd., Japan)
IGTC-78
Mechanical Properties of a High-Strength Powder Metallurgy Ni-Base Superalloy and its Application to a Gas Turbine Blisk
*K. Iwai (Kobe Steel, Ltd., Japan), A. Nagata, S. Furuta, T. Yokomaku
IGTC-79
Development of a Titanium Aluminide Turbo-charger Rotor
Y. Nishiyama, *T. Miyashita (Kawasaki Heavy Industries, Japan), T. Nakamura, H. Hino, S. Isobe, T. Noda
IGTC-80
Advanced PVD Overlay Coating Equipment for Aircraft Gas Turbine Applications
*A. Feuerstein (Leybold-Heraeus GmbH, FRG), W. Dietrich, H. Lammermann
IGTC-81
Emerging Materials Technologies for Future Gas Turbine Engines - An Overview
*R. H. Jeal (Rolls-Royce plc, UK), S. Gupta
-----------------------------------------------------------------------------------------------------
Session C-3 CYCLE PERFORMANCE I
Oct. 27 (Tuesday) 9:00-10:15 Room IV
Chairmen: Mr. D. E. Brandt (General Electric, USA), Mr. A. Sugiyama (Mitsubishi Heavy Industries, Japan)
IGTC-82
Analysis and Appraisal of Performance of Steam Injected Gas Turbine Cycle
S. -Z. Zhang, *R. Lin (Inst. of Engineering Thermophysics, China), G. -S. Lu, H. -G. Jin, R. Cai
IGTC-83
Gas Turbine Cycle with Steam Reforming of Methanol
*S. Tsuruno (National Defense Academy, Japan), S. Fujimoto
IGTC-84
Using Surplus Peat as a Fuel for Gas Turbines to Generate Electricity
*R. W. Ball (New Zealand)
-----------------------------------------------------------------------------------------------------
Session C-4 CYCLE PERFORMANCE II
Oct. 27 (Tuesday) 10:30-12:00 Room IV
Chairmen: Mr. D. E. Brandt (General Electric, USA), Mr. A. Sugiyama (Mitsubishi Heavy Industries, Japan)
IGTC-85
On Thermal Efficiencies of Gas Turbine Systems Combined with Hot Stoves for a Blast Furnace
*N. Nishiwaki (Nishiwaki Lab., Japan), R. Oshima, T. Ueno, J. Konishi
IGTC-86
Thermodynamic and Economic Analysis of CAES Plants
G. Lozza, *E. Macchi (Politecnico di Milano, Italy), P. M. Pello
IGTC-87
Analysis of Operating Characteristics of AGTJ-100A Reheat Gas Turbine and Application of Techniques for Dynamic Simulation
*H. Yasui (Engineering Research Assoc. for Adv. Gas Turbines, Japan), H. Karasawa, T. Tohyama
-----------------------------------------------------------------------------------------------------
Session C-5 CYCLE PERFORMANCE III
Oct. 28 (Wednesday) 9:00-10:15 Room IV
Chairmen: Mr. G. Oganowski (General Electric, USA), Mr. K. Hoshino (Hitachi, Ltd., Japan)
IGTC-88
Gas Turbine Combined Cycle Power Generation System Topped by Closed Cycle MHD
*K. Yoshikawa (Tokyo Inst. of Technology, Japan), S. Shioda
IGTC-89
Gas Turbine Combined Cycles - Natural or Forced Circulation Steam Generators
*A. Pasha (Henry Vogt Machine Co., USA)
IGTC-90
Technologies for Combined Cycle Power and Cogeneration Plants Energized by Fluidized Bed Combustors
*O. Bellofatto (Snamprogetti S. p. A., Italy), A. Pessina
-----------------------------------------------------------------------------------------------------
Session C-6 STRENGTH AND VIBRATION
Oct. 28 (Wednesday) 10:30-12:00 Room IV
Chairmen: Prof. F. -Y. Zhong (Shanghai Jiaotong Univ., China), Mr. T. Shioya (Univ., of Tokyo, Japan)
IGTC-91
On the Mechanism of Blade Excitation Due to Surge on Centrifugal Compressors
*U. Haupt (Univ. of Hannover, FRG), J. Da-feng, U. Seidel, M. Rautenberg
IGTC-92
An Analysis of Blade Vibration of an Axial-Flow Compressor during Rotating Stall
*N. Hagiwara (Hitachi, Ltd., Japan), M. Yoneyama, H. Ishii, Y. Matsuura, Y. Kashiwabara
IGTC-93
Dynamic Response of a Compressor Blade with Slip at the Root
*J. -C. Lin (Shanghai Inst. of Mechanical Engineering, China), X.-H. Lu
IGTC-94
Optimum Design of Turbo Machinery Wheels under Transient Thermal and Centrifugal Loadings
*T. Hattori (Hitachi, Ltd., Japan), H. Ohnishi, S. Sakata
-----------------------------------------------------------------------------------------------------
Session C-7 AEROENGINE OPERATION
Oct. 29 (Thursday) 9:00-10:15 Room IV
Chairmen: Mr. G. E. Kirk (Rolls-Royce, UK), Mr. Y. Omote (Mitsui Engineering & Shipbuilding, Japan)
IGTC-95
Installation and Operation of the FJR710 Engine in the NAL-QSTOL "ASUKA"
*M. Sasaki (National Aerospace Lab., Japan), M. Morita, T. Torisaki, S. Nakayama, S. Sekine
IGTC-96
Some Development Problems and Solutions for Structural Safety and Durability of F3 Turbofan Engine
*H. Kikuchi (Japan Defense Agency, Japan), M. Ohtsuka
IGTC-97
Theoretical and Experimental Studies of Modification of Turbofan Engine by Fan Stages Cropping Scheme
*F.-Y. Zhong (Shanghai Jiaotong Univ., China)
-----------------------------------------------------------------------------------------------------
Session C-8 GAS TURBINE DEVELOPMENT
Oct. 29 (Thursday) 10:30-12:00 Room IV
Chairmen: Mr. G. E. Kirk (Rolls-Royce, UK), Mr. Y. Omote (Mitsui Engineering & Shipbuilding, Japan)
IGTC-98
LM5000 and LM2500 Steam Injection Gas Turbine
*G. Oganowski (General Electric, USA)
The PGT10 Heavy Duty Gas Turbine - A Progress in the Design State of the Art and Test Techniques
R. Gusso, *E. Benvenuti (Nuovo Pignone S.P.A.), E. Valentini
IGTC-99
Development of AGTJ-100A Reheat Gas Turbine
*A. Sugiyama (Engineering Research Assoc. for Adv. Gas Turbines, Japan), M. Matsuki, S. Sano, K. Takeya, T. Imai
IGTC-100
Reliability and Maintainability Considerations of the Advanced MS7001F Gas Turbine
*D. E. Brandt (General Electric, USA)
-----------------------------------------------------------------------------------------------------