1983 Tokyo International Gas Turbine Congress and Exhibition
Sun Shine Prince Hotel, Oct. 23-29, 1983
-----------------------------------------------------------------------------------------------------
Special Lecture I
October 24 (Monday) 14:00 - 15:00 Tenran Room
Chairman: Mr. Kenneth A. Teumer (Woodward Governor Co.)
A Survey on Gas Turbine Technology and Research Work in Japan
Prof. Hideo Tanaka (University of Tokyo)
Special Lecture II
October 26 (Wednesday) 14:00 - 15:00 Tenran Room
Chairman: Prof. Hiroyuki Takata (University of Tokyo)
The Trend of Future Gas Turbine Technology
Dr. Melvin J. Hartmann (NASA Lewis Research Center)
-----------------------------------------------------------------------------------------------------
October27 (Thursday) 14:00 - 17:15 Tenran Room
Chairmen: Prof. Masakatsu Matsuki (Nippon Institute of Technology), Mr. Roy Kamo (Cummins Engine Co.)
Combined Cycle Power Generation Systems with Use of High Performance Gas Turbines
Panelists:
Mr. Mitsuo Arakawa (Tokyo Electric Power Co.)
Dr.-Ing. Bernard Becker (Kraftwerk Union)
Dr.-Ing. Wilhelm Endres(BBC Brown, Boveri & Co.)
Mr. Keith W. Johnson(Westinghouse Electric Corp.),
Dr. Kazuo Takeya (Engineering Research Association for Advanced Gas Turbines)
Mr. Douglas M. Todd (General Electric Co.)
Mr. Akira Yamakawa (Tohoku Electric Power Co.)
Program of the Panel Discussion
14:00 - l4:10
1. Introduction and Keynote Speech Prof. M. Matsuki
14:10 - 15:55
2. Panelists' Speech
i) Mr. A. Yamakawa
ii) Mr. M. Arakawa
iii) Dr. K. Takeya
iv) Mr. K.W. Johnson
v) Mr. D.M.Todd
vi) Dr.-Ing. B. Becker
vii) Dr.-Ing. W. Endres
15:55 - 16:10 Coffee Break
16:10 - 16:20
3. Brief Overview Prof. M. Matsuki
16:20 - 17:05
4. Supplementary Remarks by the Panelists and Audience Participation
17:05 - 17:15
5. Concluding Remarks Mr. R. Kamo
----------------------------------------------------------------------------------------------------
Technical Sessions
Session A-1 HEAT TRANSFER I (External Surface)
Oct. 24 (Monday) 9:00- 10:15 Room A (Niji Room)
Chairmen: Dr. C. I. Hussain (Univ. of Leeds, UK), Mr. S. Kan (Ship Research Inst., Japan)
IGTC-1
Liquid Crystal Visualization of Surface Heat Transfer on a Concavely Curved Turbulent Boundary Layer
*J.C. Simonich (United Technologies Research Center, USA), R. J. Moffat
IGTC-2
Calculation of Heat Transfer to Convection-Cooled Gas Turbine Blades
*W. Rodi (Univ. of Karlsruhe, FRG), G. Scheuerer
IGTC-3
The Endwall Influence on Heat Transfer from a Single Cylinder (The Horseshoe Vortex Effect)
*L. S. Han (Ohio State Univ., USA), C. Ma, J. R. Rapp
-----------------------------------------------------------------------------------------------------
Session A-2 HEAT TRANSFER II (Unsteady)
Oct.24 (Monday) 10:30- 12:10 Room A (Niji Room)
Chairmen: Dr. C.I. Hussain (Univ. of Leeds, UK), Mr. S. Kan (Ship Research Inst., Japan)
IGTC-4
Unsteady Heat Transfer of Oscillating Wake Flows
*S. Kotake (Univ. of Tokyo, Japan), I. Aoki
IGTC-5
Effect of an Oscillation Flow Direction on Leading Edge Heat Transfer
M. L. Marziale, *R. E. Mayle (Rensselaer Polytechnic Inst., USA)
IGTC-6
Combined Influence of Unsteady Free Stream Velocity and Free Stream Turbulence on Stagnation Point Heat Transfer
*R. S. R. Gorla (Cleveland State Univ., USA)
IGTC-7
Unsteady Temperature Analysis of Air-Cooled Turbine Vanes
*T. Yoshida (National Aerospace Lab., Japan), T. Kumagai, F. Mimura
-----------------------------------------------------------------------------------------------------
Session A-3 HEAT TRANSFER III (Internal Surface)
Oct. 24 (Monday) 15:30- 17:10 Room A (Niji Room)
Chairmen: Prof. S. Kotake (Univ. of Tokyo, Japan), Prof. W. Rodi (Univ. of Karlsruhe, FRG)
IGTC-8
Cooling Characteristics of Air Cooled Radial Turbine Blades
T. Sato, *K. Takeishi (Mitsubishi Heavy Industries, Japan), M. Matsura, J. Miyauchi
IGTC-9
Impingement Cooling of Gas Turbine Components
G. E. Andrews, *C. I. Hussain (Univ. of Leeds, UK)
IGTC-10
Impingement Cooling of Turbine Airfoils by Multiple Two-Dimensional Jets
*LS. Han (Ohio State Univ., USA), N. Kayansayan, C. W. Dantzer
IGTC-11
Effects of Pin Shape and Array Orientation on Heat Transfer and Pressure Loss in Pin Fin Arrays
*D. E. Metzger (Arizona State Univ., USA), C. S. Fan, S. W. Haley
-----------------------------------------------------------------------------------------------------
Session A-4 HEAT TRANSFER IV (Heat Exchanger)
Oct.25 (Tuesday) 9:00- 10:15 Room A (Niji Room)
Chairmen: Prof. N. Kasagi (Univ. of Tokyo, Japan), Dr. J.C. Simonich (United Tech., USA)
IGTC-12
Multidimensional Digital Simulation of Rotating Regenerator Flow
H. Hempel, *D. Schmidt (Daimler-Benz, FRG)
IGTC-13
A Measurement Technique Developed for the Leakage Flow Rate in Regenerator
*S. Higuchi (Toyota Motor, Japan), W. Akai
IGTC-14
Heat Transfer and Flow Friction Characteristics for Fin Geometries of Extruded Ceramic Regenerator Core
*T. Matsuhisa (NGK Insulators, Japan), I. Oda
-----------------------------------------------------------------------------------------------------
Session A-5 HEAT TRANSFER V (Film Cooling)
Oct.25 (Tuesday) 10:30- 12:10 Room A (Niji Room)
Chairmen: Prof. N. Kasagi (Univ. of Tokyo, Japan), Dr. J.C. Simonich (United Tech., USA)
IGTC-15
Analysis of Film Cooling and Full-Coverage Film Cooling of Gas Turbine Blades
*E. R. G. Eckert (Univ. of Minnesota, USA)
IGTC-16
Heat Transfer and Turbulence Measurements of a Film-Cooled Flow over a Convexly Curved Surface
*K. Furuhama, M. N. Frota (Stanford Univ., USA), R. J. Moffat
IGTC-17
Experimental Study of Temperature Effect on Turbine Vane Cooling Performance with Multi-Row Ejection
*K. Sakata (National Aerospace Lab., Japan), T. Kumagai
IGTC-18
On the Nature of Jets Issuing from a Row of Holes into a Low Reynolds Number Mainstream Flow
*T. Yoshida (National Aerospace Lab., Japan), R. J. Goldstein
-----------------------------------------------------------------------------------------------------
Session A-6 COMBUSTION I (Combustor Development)
Oct.25 (Tuesday) 14:00 - 15:15 Room A (Niji Room)
Chairmen: Dr. M. Hori (Univ. of Tokyo, Japan), Mr. M. Nomura (Ship Research Inst., Japan)
IGTC-19
A Design Technique for All Sorts of Gas Turbine Combustors
*K. Suzuki (Mech. Engineering Lab., Japan)
IGTC-20
Combustor Development for FJR710/600 Engine
*T. Tamaru (National Aerospace Lab., Japan), A. Ishii, T. Saito, S. Horiuchi, K. Suzuki
IGTC-21
Research and Development on Combustors for Advanced Reheat Gas Turbine
K. Mori, J. Kitajima, *T. Kimura (Kawasaki Heavy Industries, Japan), Y. Enzaki
-----------------------------------------------------------------------------------------------------
Session A-7 COMBUSTION II (Combustor Development)
Oct.25 (Tuesday) 15:30 - 17:10 Room A (Niji Room)
Chairmen: Dr. M. Hori (Univ. of Tokyo, Japan), Mr. M. Nomura (Ship Research Inst., Japan)
IGTC-22
Development of High Temperature Combustor Thermally Protected by Ceramic Tiles
*T. Abe (Central Research Inst. of Elec. Power Industry, Japan), H. Ishikawa
IGTC-23
Thermal Characteristics of Gas Turbine Combustor in High Temperature Operation
*S. Achiwa (Nissan Motor, Japan), M. Sasaki, S. Yamazaki
IGTC-24
Recent Advances in Vaporiser Fuel Injection Technology
*A. Sotheran (Rolls-Royce, UK)
-----------------------------------------------------------------------------------------------------
Session A-8 COMBUSTION III (Hydrogen)
Oct. 26 (Wednesday) 9:OO - 10:15 Room A (Niji Room)
Chairmen: Mr. K. Mori (Kawasaki Heavy Industries, Japan), Mr. A. Sotheran (Rolls-Royce, UK)
IGTC-25
The Characteristics of Swirling Hydrogen Jet Flames
*S. Yuasa (Tokyo Metropolitan College of Tech., Japan), N. Goto
IGTC-26
An Approach to High Heat Release Combustors of Hydrogen Fueled Gas Turbines
*M. Nomura (Ship Research Inst., Japan), H. Ikeda
IGTC-27
Reheat Gas Turbine with Hydrogen Combustion between Blade Rows
*S. Kan (Ship Research Inst., Japan), T. Morishita, K. Hiraoka
-----------------------------------------------------------------------------------------------------
Session A-9 COMBUST1ON IV (Combustion Research)
Oct.26 (Wednesday) 10:30 - 12:10 Room A (Niji Room)
Chairmen: Mr. K. Mori (Kawasaki Heavy Industries, Japan), Mr. A. Sotheran (Rolls-Royce, UK)
IGTC-28 Analysis and Laser Probe Measurement of Swirling and Bluff Body Flames
S. Fujii, *K. Eguchi (National Aerospace Lab., Japan), M. Gomi
IGTC-29
Flow Characterization with and without Combustion in a Swirl Type Combustor
*M. Arai (Univ. of Hiroshima, Japan), T.M. Farag, H. Hiroyasu
IGTC-30
A Study on the Combustion in the Primary Region of a Gas Turbine-Type Continuous Combustion
Chamber (The Effects of Secondary Air on Primary Combustion)
*S. Nakamura (Keio Univ., Japan), 0. Kawaguchi, G.T. Sato
IGTC-31
A Study on a Combustor Burning Low-Calorific Fuel Gases
*Y. Mizutani (Osaka Univ., Japan), T. Matsumoto
-----------------------------------------------------------------------------------------------------
Oct. 26 (Wednesday) 15:30 - 17:30 Room A (Niji Room)
Chairmen: Prof. Y. Mizutani (Osaka Univ., Japan), Dr. Y. S. H. Najjar (Yarmouk Univ., Jordan)
IGTC-32
Effects of Heterogeneity of Mixtures on Gaseous Emissions in Premixed/Prevaporized Combustion *S. Hayashi (National Aerospace Lab., Japan), N. Horie, T. Goshima
IGTC-33
Measurements of NO2/NOx Ratio in a Laboratory Swirl Combustor
*M. Hori (Univ. of Tokyo, Japan)
IGTC-34
Numerical Analysis of NO2 Formation in Combustors
*T. Sano (Tokai Univ., Japan), S. Kotake
-----------------------------------------------------------------------------------------------------
Session A-11 COMBUSTlON V (Heavy Oil)
Oct. 27 (Thursday) 9:00 - 10:15 Room A (Niji Room)
Chairmen: Prof. O. Kawaguchi (Keio Univ., Japan), Prof. O. Y. Yang (Inha Univ., Korea)
IGTC-35
An Experimental Study on Spray Combustion of Residual Fuel Oil Assisted by Gaseous Fuel
*T. Kumakura (Ship Research Inst., Japan), K. Hatori
IGTC-36
Engineering Prediction of Soot Concentration in the Primary Zone of the Gas Turbine Combustor
*Y. S. H. Najjar (Yarmouk Univ., Jordan)
IGTC-37
Reliable Processing of Heavy Oils as Alternative Fuels for Gas Turbines
*R.N. Lucas (Petrolite Corp., USA)
-----------------------------------------------------------------------------------------------------
Session A-12 CYCLE PERFORMANCE
Oct.27 (Thursday) 10:30 - 12:10 Room A (Niji Room)
Chairmen: Dr. M. P. Boyce (Boyce Engineering International, Inc., USA), Prof. A. Nagashima (Keio Univ., Japan)
IGTC-38
A Highly Efficient Regenerative Gas Turbine System by New Method of Heat Recovery with Water Injection
Y. Mori, *H. Nakamura (Mitsubishi Gas Chemical, Japan), T. Takahashi, K. Yamamoto
IGTC-39
On Hydrogen Fuel Gas Turbine with Over Expansion
*K. Enomoto (Musashi Inst. of Tech., Japan). M. Tomita, T. Sato
IGTC-40
Performance and Characteristics of Twin Shaft Reheat Cycle Gas Turbine
*H. Yasui (Engineering Research Assoc. for Adv. Gas Turbines, Japan)
IGTC-4l
Critical Assessment of Thermophysical Properties Data of Combustion Gases for Calculating the Performance of Gas Turbine
*N. Matsunaga (Keio Univ., Japan), T. Hoshino, A. Nagashima
-----------------------------------------------------------------------------------------------------
Session B-1 AERODYNAMICS I (Steady Flow)
Oct.24 (Monday) 9:00 - 10:15 Room B (Ranzan Room)
Chairmen: Mr. S. Nagano (Ishikawajima-Harima Heavy Industries, Japan), Mr. J. Paulon (ONERA., France)
IGTC-42 Three-Dimensional Structure and Decay of Vortices behind an Axial Flow Rotating Blade Row
*M. Inoue (Kyushu Univ., Japan), M. Kuroumaru
IGTC-43 Influence of Dihedral on the Secondary Flow in a Two Dimensional Compressor Cascade
*F. A. E. Breugelmans (von Karman Inst., Belgium), Y. Carels. M. Demuth
IGTC-44 , Control of Secondary Flow in a Turbine Stage: Experimental and Theoretical Study
*L. Belik (College of Mech. and Elec. Engineering, Czechoslovakia), J. Skopek
-----------------------------------------------------------------------------------------------------
Session B-2 AERODYNAMICS II (Turbomachinery)
Oct.24 (Monday) 10:30- 12:10 Room B (Ranzan Room)
Chairmen: Mr. S. Nagano (Ishikawajima-Harima Heavy Industries, Japan), Mr. J. Paulon (ONERA, France)
IGTC-45
Fully-Three Dimensional Flow Field Analysis through Turbine Stages - Comparison between Computation and Experiments
*T. Kobayashi (Toshiba Corp., Japan), A. Suzuki, T. Araki, Y. Okamoto
IGTC-46
Core Compressor Developments for Large Civil Jet Engines
*C. Freeman (Rolls-Royce, UK), R. Dawson
IGTC-47
Design and Performance Comparison of Three High-Speed Fans
S. Fujii, *H. Nishiwaki (National Aerospace Lab., Japan), M. Gomi
IGTC-48
An Experimental Investigation of Pressure Losses in Cooling Air Supply System for Gas Turbine Rotor
*N. Kobayashi (Hitachi, Ltd., Japan), M. Matsumoto, M. Shizuya
-----------------------------------------------------------------------------------------------------
Session B-3 AERODYNAMICS III (Turbomachinery)
Oct.24 (Monday) 15:30 -17:10 Room B (Ranzan Room)
Chairmen: Dr. H. -H. Fruhauf (Universitat Stuttgart, FRG), Dr. S. Fujii (National Aerospace Lab., Japan)
IGTC-49
Measurements of Flow Field within an Axial Flow Fan Rotor Using a Laser Two-Focus Velocimeter
*S. Yasu (Ishikawajima-Harima Heavy Industries. Japan), T. Tamaki, S. Nagano
IGTC-50
Some Applications of Actuator and Semi-Actuator Disk Theory to the Problem of Intake/Engine Compatibility
C. J. Ham, *D. D. Williams (Rolls-Royce. UK)
IGTC-51
Environmental Problems in Turbomachinery
*W. Tabakoff (Univ. of Cincinnati, USA), H. Hamed
IGTC-52
Mathematical Modelling of Performance Characteristics and Optimization of Turbomachine Stages
K. P. Seleznev, *Y. B. Galerkin (Leningrad Polytechnic Inst. USSR)
-----------------------------------------------------------------------------------------------------
Session B-4 COMPUTATlONAL AERODYNAMICS I
Oct.25 (Tuesday) 9:00 - 10:15 Room B (Ranzan Room)
Chairmen: Prof. M. Inoue (Kyushu Univ., Japan), Prof. Y. Tanida (Univ. of Tokyo, Japan)
IGTC-53
Development of Computational Flow Analysis for Blade Rows
*H. -H. Fruhauf (Univ. of Stuttgart, FRG)
IGTC-54
Time Dependent Computation of the Euler Equations for Designing 2-D Cascades, Including the Case of Transonic Shock Free Design
*L. Zannetti (Politecnico di Torino, Italy)
IGTC-55
A Numerical Method to Weaken Shock in Transonic Cascades
H. -X. Jiangl, *S. Zhou (Beijing Inst. of Aeronautics and Astronautics. China), B. -Z. Lin
-----------------------------------------------------------------------------------------------------
Session B-5 COMPUTATIONAL AERO-DYNAMICS II
Oct. 25 (Tuesday) 10:30 - 12:10 Room B (Ranzan Room)
Chairmen: Prof. M. Inoue (Kyushu Univ., Japan), Prof. Y. Tanida (Univ. of Tokyo, Japan)
IGTC-56
A Comparison of the Streamline Curvature Method with the Matrix Method Used for Turbomachinery Design in Non-Orthogonal Curvilinear Coordinate System
*Z. -C. Wang (Harbin Inst. of Tech., China). G. -I. Li, W. -Y. Xu
IGTC-57
Purely Three Dimensional Analysis of a Flow in an Axial Rotor by Panel Method
*Y. Miyake (Osaka Univ., Japan), K. Bando, T. Miyawaki, S. Murata
IGTC-58
Finite Element Analysis for 3-D Compressible Potential Flow in Turbomachinery
*H. Daiguji (Tohoku Univ., Japan)
IGTC-59
Two-Dimensional Unsteady Flow in Comprex Rotor
*H.-D. Jiang (Academia Sinica, China)
-----------------------------------------------------------------------------------------------------
Session B-6 AERODYNAMICS IV (Radial Flow)
Oct.25 (Tuesday) 14:00 - 15:15 Room B (Ranzan Room)
Chairmen: Dr. F. Hussein (Univ. of Cincinnati, USA), Prof. S. Masuda (Keio Univ., Japan)
IGTC-60
The Effect of Boundary Layer Control on the Performance of Radial Fan Impellers
*A. Shibl (King Saud Univ., Saudi Arabia)
IGTC-61
A Consideration Concerning Stall and Surge Limitations within Centrifugal Compressors - Part II
*E. Ejiri (Nissan Motor, Japan), H. Kosuge, T. Itoh
IGTC-62
A Development Research of Radial Inflow Turbine
*E. Matsuo (Mitsubishi Heavy Industries, Japan), Y. Okazaki, N. Nakazawa
-----------------------------------------------------------------------------------------------------
Session B-7 AERODYNAMICS V (Radial Flow)
Oct. 25 (Tuesday) 15:30 - 17:10 Room B (Ranzan Room)
Chairmen: Dr. F. Hussein (Univ. of Cincinnati, USA), Prof. S. Masuda (Keio Univ., Japan)
IGTC-63
Slip Factor Dependence on Flow Coefficient in Centrifugal Compressors
*Y. Sakamoto (Kobe Steel, Japan), M. Suyari, A. Nagata, T. Kobayashi, H. Ishigami, S. Kinoshita
IGTC-64
Research on Supersonic Diffusers of Centrifugal Compressor by Means of Swirl Flow (1st Report) Flow in a diffuser at various Mach numbers
*M. Yamaguchi (Kyushu Univ., Japan). Y. Senoo
IGTC-65
Aerodynamic Performance of a Turbine Scroll with a Diagonal Flow Nozzle
T. Ikui, M. Inoue, K. Hara. *M. Furukawa (Kyushu Univ., Japan)
IGTC-66
The Three-Dimensional Compressible Flow in a Radial Inflow Turbine Scroll
*A. Hamed (Univ. of Cincinnati, USA), W. Tabakoff, M. Malak
-----------------------------------------------------------------------------------------------------
Session B-8 UNSTEADY AERODYNAMICS I
Oct. 26 (Wednesday) 9:00 - 10:15 Room B (Ranzan Room)
Chairmen: Prof. S. Kaji (Univ. of Tokyo, Japan), Prof. A. Shibl (King Saud Univ., Saudi Arabia)
IGTC-67
Measurement of the Three-Dimensional Unsteady Flow inside a Rotor Blade Passage of an Axial- Flow Fan
*K. Matsuuchi (Univ. of Tsukuba, Japan), T. Adachi
IGTC-68
Measurement of 3-D Unsteady Flow Downstream of Rotor and Stator Blades in Axial-Flow Compressors
*H. E. Gallus (Tech. Univ. Aachen, FRG), H. Hoenen
IGTC-69
Measurement of Unsteady Pressure Distribution on Oscillating Airfoils in a Turbine Annular Cascade
*H. Kobayashi (National Aerospace Lab., Japan)
-----------------------------------------------------------------------------------------------------
Oct.26 (Wednesday) 10:30- 12:10 Room B (Ranzan Room)
Chairmen: Prof. G. Cerri (Univ. La Sapienza Rome, Italy), Mr. J. Miyauchi (Mitsubishi Motors Corp., Japan)
IGTC-70
The Influence of Aircraft Turbomachine Technology on Vehicular Turbocharger Design
*J. L. Mason (Garrett Corp., USA)
IGTC-71
Development of High Specific Speed Centrifugal Compressors for Turbochargers
*M. Saito (Ishikawajima-Harima Heavy Industries, Japan), M. Kurasawa, K. Kurata, Y. Morishita, Y. Imai, K. Akiyama
IGTC-72
Development of a High Specific Speed Radial-Inflow Turbine for Turbochargers
T. Ohkuwa. T. Koike, *M. Sakakida (Ishikawajima-Harima Heavy Industries, Japan), N. Misaki, K. Funayama, M. Yumoto
IGTC-73
Influence of Heat Transfer between Turbine and Compressor on the Performance of Small Turbochargers
M. Rautenberg, *A. Mobarak (Univ. of Hannover, FRG), M. Malobabic
-----------------------------------------------------------------------------------------------------
Oct. 26 (Wednesday) 15:30- 17:35 Room B (Ranzan Room)
Chairmen: Prof. F. Breugelmans (von Karman Inst., Belgium), Mr. H. Endo (Mitsui Engg. & Shipped, Japan)
IGTC-74
How a Hot Air Turbine Works as a Regenerative Supercharger
*G. Cerri (Univ. "La Sapienza" Rome, Italy)
IGTC-75
Development of Mini-Turbochargers for Passenger Car
M. Hayashi, *Y. Okazaki (Mitsubishi Heavy Industries, Japan), H. Tsujimura
IGTC-76
Design and Performance of the T2 Turbocharger
*J. L. Mason (Garrett Corp., USA), P. Chapman, J. R. Meyer, A. Parois, M. M. Smith
IGTC-77
Development of a Variable Geometry Turbocharger for Trucks & Buses
H. Satoh, J. Miyauchi, *N. Nakazawa (Mitsubishi Motors. Japan), E. Matsuo
IGTC-78
Application of Newly Developed Turbocharger for Improved Fuel Consumption of Heavy Duty Truck Engine
*T. Otani (Hino Motors, Japan), I. Joko, A. Sato, M. Shimizu, K. Harada
-----------------------------------------------------------------------------------------------------
Session B-11 UNSTEADY AERODYNAMICS II
Oct.27 (Thursday) 9:00- 10:15 Room B (Ranzan Room)
Chairmen: Prof. T. Adachi (Univ. of Tsukuba, Japan), Prof. H. E. Gallus (Tech. Univ. Aachen. FRG)
IGTC-79
Measurement of the Radial Flow along a Low Speed Compressor Blading during Unstalled and Stalled Operation
*F. A. E. Breugelmans (von Karman Inst., Belgium), K. Mathioudakis, L. Lambropoulos
IGTC-80
An Experimental Study of Rotating Stall in a Multistage Axial-Flow Compressor
*D. K. Das (Sate Univ. of New York, USA), H. K. Jiang
IGTC-81
Noise Prevention in Tube Type Heat Exchangers Employed in Gas Turbines
*S. Suzuki (Ebara Corp., Japan), Y. Ugai, Y. Maruta, S. Mori
-----------------------------------------------------------------------------------------------------
Session B-12 UNSTEADY AERODYNAMICS III
Oct. 27 (Thursday) 10:30 - 12:10 Room B (Ranzan Room)
Chairmen: Prof. T. Adachi (Univ. of Tsukuba, Japan), Prof. H. E. Gallus (Tech. Univ. Aachen, FRG)
IGTC-82
Compressor Response to Periodic Pressure Fluctuations
*J. Paulon (ONERA, France)
IGTC-83
Aerodynamic Responses of Turbine Rotor Blade to Sinusoidal Gust of Large Vorticity
T. Nishiyama. *K. Funazaki (Tohoku Univ., Japan)
IGTC-84
Analyses of Cascade Flutter as a Multi-Eigenvalue Problem (On Cascade Composed of Two Groups of Blades Having Different Natural Frequencies)
*H. Tanaka (Univ. of Tokyo, Japan), Y. Hanamura, I. Fujimoto
IGTC-85
Aerodynamic Characteristics of an Airfoil Oscillating in Transonic Flow between Parallel Walls
*T. Shiratori (Tokyo Metropolitan College of Tech., Japan), Y. Tanida
-----------------------------------------------------------------------------------------------------
Session C-1 VEHICULAR GAS TURBINE I
Oct.24 (Monday) 9:00 - 10:15 Room C (Tenzan Room)
Chairmen: Mr. J. L. Mason (The Garrett Corp., USA), Mr. S. Yamazaki (Nissan Motor, Japan)
IGTC-86
DOE Automotive Gas Turbine Modern Technology Engine Program
*S. B. Kramer (U.S. Dept. of Energy, USA)
IGTC-87
Development of Power Turbine for Vehicular Gas Turbine
T. Sato, S. Aoki. *H. Mori (Mitsubishi Heavy Industries, Japan), N. Nakazawa
-----------------------------------------------------------------------------------------------------
Session C-2 VEHICULAR GAS TURBINE II
Oct.24 (Monday) 10:30 - 12:10 Room C (Tenzan Room)
Chairmen: Mr. J. L. Mason (The Garrett Corp., USA), Mr. S. Yamazaki (Nissan Motor, Japan)
IGTC-88
Truck Turbine Engine Development at Mitsubishi
H. Satoh, *J. Miyauchi (Mitsubishi Motors, Japan), K. Iwasaki
IGTC-89
Evaluation and Compatibility Testing of the GT601 Gas Turbine Engine for Application to U.S. Army Combat Vehicles
*T. R. Wilson (Garrett Turbine Engine, USA), P.C. Glance
IGTC-90
An Experimental Study of GT-Battery Hybrid Vehicle
*A. Watanabe (Toyota Motor, Japan), D. Fukuda
-----------------------------------------------------------------------------------------------------
Session C-3 CONTROL AND MONITORING
Oct.24 (Monday) 15:30-17:10 Room C (Tenzan Room)
Chairmen: Mr. D. E. Brandt (General Electric Co., USA), Mr. H. Yasui (Toshiba Corp., Japan)
IGTC-91
Suboptimal Control of Two-Shaft Type Gas Turbine with a Variable Geometry Turbine
*N. Matsumoto (Ashikaga Inst., of Tech., Japan)
IGTC-92
Development of Low Cost Digital Control System for Small Gas Turbine Engine
*K. Kishimoto (Mitsubishi Heavy Industries, Japan), M. Sakurai, K. Shimazaki
IGTC-93
Application of Aircraft Integrated Data System Jet Engine Module Performance Monitoring and Turbine Blade Life Accounting
*K. Watanabe (Japan Air Lines, Japan). M. Nakai, O. Sasahara
IGTC-94
The Development and Implementation of Advanced On-line Monitoring and Diagnostic Systems for Gas Turbines
*M. P. Boyce (Boyce Engineering International, USA), C. Meher-Homji, G. Mani
-----------------------------------------------------------------------------------------------------
Session C-4 MATERIAL AND MANUFACTURING I
Oct.25 (Tuesday) 9:00 - 10:15 Room C (Tenzan Room)
Chairmen: Mr. J. Schmidt (Turbo-Union, FRG), Mr. K. Takahara (National Aerospace Lab., Japan)
IGTC-95
Performance of Thermal Barrier Coating for Gas Turbine Airfoil in Engine Test
*H. Takeda (Toshiba R&D Center, Japan), K. Shimotori, H. Baba, T. Suzuki, K. Takahara, T. Yoshida
IGTC-96
Evaluation of Abradable Turbine Seat by Friction-Wear Test and Engine Performance Test
*T. Nakamura (Kawasaki Heavy Industries, Japan), Y. Nishiyama, H. Hirakawa. N. Wasada
IGTC-97
Current State of Hot Section (Gas) Turbine Repair and Recovery Technology in the Western World
*M.H. Haafkens (Interturbine Holland, Netherlands)
-----------------------------------------------------------------------------------------------------
Session C-5 MATERIAL AND MANUFACTURING-II
Oct.25 (Tuesday) 10:30 - 12:10 Room C (Tenzan Room)
Chairmen: Mr. J. Schmidt (Turbo-Union, FRG), Mr. K. Takahara (National Aerospace Lab., Japan)
IGTC-98
Nickel-Base Superalloys Developed for Advanced Gas Turbine in "Moonlight" National Project
*M. Yamazaki (National Research Inst. for Metals, Japan)
IGTC-99
The Characteristics of Thermal-Mechanical Fatigue Strength in Superalloys for Gas Turbine
*A. Nitta (Central Research Inst. of Elec. Power Industry, Japan), K. Kuwabara, T. Kitamura
IGTC-100
The Characteristics of Superalloy Disks Manufactured by ESR Process
M. Kohno, T. Yamada, T. Honjo, M. Okamura, *K. Aota (Kobe Steel, Japan)
IGTC-101
Experiences on the Manufacture of Casted Hollow Superalloy Gas Turbine Blades in Large Size
*H. Takeuchi (Mitsubishi Steel Mfg., Japan), J. Zama
-----------------------------------------------------------------------------------------------------
Oct.25 (Tuesday) 14:00 - 15:15 Room C (Tenzan Room)
Chairman: Mr. M. Kubota (Hitachi Ltd., Japan)
IGTC-102
Developments in Integrated Gasification Combined Cycle Power Plants
*D. M. Todd (General Electric, USA)
IGTC-103
GUD Combined-Cycle Plants with Integrated Coal Gasification and Low NOx Emissions
*B. Becker (Kraftwerk Union, FRG), A. Kreutzer, K. Goebel
IGTC-104
New Concepts for Coal Firing Two Step Heating Combined Cycle
*J. Yamaga (Ishikawajima-Harima Heavy Industries, Japan), K. Watanabe
-----------------------------------------------------------------------------------------------------
Oct. 25 (Tuesday) 15:30 - 17:35 Room C (Tenzan Room)
Chairmen: Mr. J. S. Joyce (Kraftwerk Union, FRG), Mr. T. Sato (Mitsubishi Heavy Industries, Japan)
IGTC-105
A Cogeneration System for a High-Rise Building Using Dual-Fuel Gas Turbines
M. Kohnosu, *M. Nishino (Tokyo Gas Co., Japan), T. Hamano, A. Watanabe
IGTC-106
100,000 Hours Operation on an Aero-Derived Gas Turbine in a Process Application
*F. J. Dumbleton (Rolls-Royce, UK)
IGTC-107
Design and Construction of Gas-Steam Combined Cycle Plant for Higashi Niigata Thermal Power Station No.3
*A. Yamakawa (Tohoku Electric Power Co., Japan), R. Araki, I. Saito
IGTC-108
Two Years' Operating Experience for the 141 MW Combined Cycle Power Plant "Kawasaki Power Station No. 1 Unit" of the Japanese National Railways
*Y. Misonoo (Japanese National Railways, Japan), M. Kubota, H. Ishino
IGTC-109
Experience in Development and Operation of Combined-Cycle Units with High-Pressure Steam Generators and Exhaust Gas to be Discharged into Steam Boilers
*A. Prokopenko (Yuzhtechenergo, USSR)
-----------------------------------------------------------------------------------------------------
Oct.26 (Wednesday) 9:00 - 10:15 Room C (Tenzan Room)
Chairmen: Mr. C. Freeman (Rolls-Royce, UK), Dr. M. Sasaki (National Aerospace Lab., Japan)
IGTC-110
Aspects of Modern Military Aero Engines
*J. Schmidt (Turbo-Union, FRG), J.A. Hooper
IGTC-111
Research and Development of Turbofan Engine FJR710 - Updating
*M. Matsuki (Engineering Research Assoc. for Aero-Jet Engines, Japan), H. Takagi
Oral Presentation
International Collaboration on Civil Turbofan Engines - Status Report
*M. Ito (Japanese Aero Engines Corp., Japan)
-----------------------------------------------------------------------------------------------------
Session C-9 GAS TURBINE DEVELOPMENT I
Oct.26 (Wednesday) 10:30- 12:10 Room C (Tenzan Room)
Chairmen: Mr. Y. Oteki (Engg. Research Assoc. for Advanced Gas Turbines, Japan), Mr. E. J. Walsh (General Electric, USA)
IGTC-112
The Medium Size Gas Turbine Type 8 from Brown Boveri, Development and Testing
*W. Endres (Brown Boveri, Switzerland)
IGTC-113
High-Reliability Heavy-Duty Gas Turbines for 50Hz and 60Hz Power Generation and Cogeneration
*J. S. Joyce (Kraftwerk Union, FRG), H. Maghon
IGTC-114
Advanced Developments in Performance and Reliability of a Heavy Duty Gas Turbine Family
*D. E. Brandt (General Electric, USA)
IGTC-115
Mitsui SB60C-M Industrial Gas Turbine
Y. Omote, *T. Kaneda (Mitsui Engineering a Shipbuilding, Japan), S. Yamada, T. Abe
-----------------------------------------------------------------------------------------------------
Session C-10 GAS TURBINE DEVELOPMENT II
Oct.26 (Wednesday) 15:30 - 17:35 Room C (Tenzan Room)
Chairmen: Mr. F. J. Dumbleton (Rolls-Royce, UK), Mr. Y. Omote (Mitsui Engg. & Shipbld., Japan)
IGTC-116
Aerodynamic and Cooling Characteristics of a Full Scale High Temperature Turbine
*S. Aoki (Engineering Research Assoc. for Adv. Gas Turbines, Japan), K. Teshima, M. Arai, I. Fukue
IGTC-117
Technical Problems on Advanced Reheat Gas Turbines under the Moonlight Project
*K. Takeya (Engineering Research Assoc. for Adv. Gas Turbines, Japan), Y. Oteki
IGTC-118
A Manufacturer's Role in Heavy-Duty Gas Turbine Future Technology
J. R. Patterson, *E. J. Walsh (General Electric, USA)
IGTC-119
Changing Roles for the Aero-Derivative Gas Turbine in Today's Power Generation Scene
*J. A. Roberts (Rolls-Royce, UK)
-----------------------------------------------------------------------------------------------------
Session C-11 VIBRATION AND DYNAMICS I
Oct.27 (Thursday) 9:00 - 10:15 Room C (Tenzan Room)
Chairmen: Dr. T. Miyachi (National Aerospace Lab., Japan), Prof. M. Rautenberg (Univ. of Hannover, FRG)
IGTC-120
Finite Element Dynamic Analysis of a Rotating Turbine Blade
H. T. Belek, *A. Tamura (Tokyo Inst. of Tech., Japan)
IGTC-121
Vibration Characteristics and Dynamic Stresses in Hollow Turbine Blades
*J. Thomas (Univ. of Surrey, UK), S. H. Abdulrahman
IGTC-122
Slipping Behavior and Fretting Fatigue in the Disk/ Blade Dovetail Region
*T. Hattori (Hitachi, Ltd., Japan), S. Sakata, H. Ohnishi
-----------------------------------------------------------------------------------------------------
Session C-12 VIBRATION AND DYNAMICS II
Oct.27 (Thursday) 10:30- 12:10 Room C (Tenzan Room)
Chairmen: Dr. K. Shiraki (Mitsubishi Heavy Industries, Japan), Prof. J. Thomas (University of Surrey, UK)
IGTC-123
Noncontact Measurement of Rotating Blade Vibrations
*M. Endoh (National Aerospace Lab., Japan), Y. Matsuda, M. Matsuki
IGTC-124
Blade Vibration on Radial Impellers Excited by Rotating Stall-Cells and during Surge
*U. Haupt (Univ. of Hannover, FRG), M. Rautenberg
IGTC-125
A Parametric Study of the Unbalance Vibration of the Rotor Supported in a Light, Flexible Casing
*T. Miyachi (National Aerospace Lab., Japan)
IGTC-126
On the Rotor Vibration of a Naval Gas Turbine with Resilient Mounts due to External Shock
*H. Koike (Kawasaki Heavy Industries, Japan), K. Ishihara, Y. Sakai, T. Iwamoto
-----------------------------------------------------------------------------------------------------